Article Designer – Division

Access

Ribbon : Designer > Article > Top View/ Front View/ Side View

General Information

With the parameter on the tab 'Subdivision' you can define how the activated zone of the article should be divided.

The available options depend on the selected element of the element window and the the kind of article (front view, top view, side view).

Options

division

Before selecting a construction principle for the divider, you must define if you want to create a horizontal or vertical subdivision. One of the options has to be activated to define the orientation of the subdivision. For example, if you select the option Shelves, a subdivision along the Z-axis will appear. Additionally, the possible selection of the types is limited.

In addition, the options article zone and independent division and DWG file are available.

If the article zone is activated, the settings on the tab are modified. In the bottom section there is the possibility to select an article from the Article Center and to insert it into the zone. After inserting an article into a zone, the checkbox "Integrate" becomes available.

  • An integrated subarticle zone is evaluated just like a main article zone and machining can be further inherited. Settings concerning the subarticle should be applied in the subarticle itself. In the elements tree, integrated subarticles are no longer listed as separate articles but as subassemblies. Mind that the integration only works for main- and subarticles created in the same view; the checkbox is deactivated if this does not apply.

With the independent division you can create a number of new zones that overlap. Thereby it is possible to create a horizontal as well as a vertical subdivision for the same section.

With the help of DWG file for example purchased part elements can be set up as article. This has the advantage that the positioning is easier, that the parts can be output in the part lists and that a scaling is possible and some others.

The possible options depend on the construction mode.