Cut faceplates editor

Access

> Manager > Tab Details > Select machinings in the element window > Methods window > Macros imos Cut faceplates

General Information

Inserting, modifying or deleting a Cut faceplates in a part can be made with the editor grooves.

Options

In the top section of the dialogue you can define the data of the Cut faceplates. In the bottom section of the dialogue the data of the Cut faceplates, that already exists in the part, is displayed in a list. By selecting a cut faceplates from the list in the bottom section, the fields in the top section of the dialogue are filled with the data of the selected cut faceplates.

Starting Point X X-coordinate of the insertion point.
Starting Point Y Y-coordinate of the insertion point.
Starting Point z

Z- coordinate of the insertion point

The insertion point is in the middle of the part thickness by default.

Linear Division The positioning of the Cut faceplates can also be defined with linear division. The button is deactivated if the checkbox next to it is not activated. Above the button a dialog appears where a linear division for the insertion point in X, Y and Z can be entered.
Select The adjoining graphic also offers the opportunity to change the reference points, which is done by clicking on the graphic. The co-ordinate system is changed by selecting the corner points in the graphic. The entered coordinates then refer to this corner point. This makes it possible to enter relative modifications.
Length (x)

Length of the cut faceplate in mm.

Width (y) Width of the cut faceplate in mm.
Depth (z) Depth of the cut faceplate in mm.
Corner radius

The corners of the cut faceplate are rounded off to the entered value.

The entry is shown in mm.

Rabbet offset

If the faceplate pocket is to be inserted into a door with a rabbet, you can enter the rabbet width with this parameter and therefore move the faceplate pocket to the entered value.

The offset is not shown in the preview.

Orientation

Definition of the orientation of the cut faceplate.

The following orientations are available:

  • HXP horizontal (x positive)
  • HXN horizontal (x negative)
  • HYP horizontal (y positive)
  • HYN horizontal (y negative)
  • UNI Universal

Next to every selected orientation a graphic of this orientation scheme appears for a better overview.

Rotation X Rotation angle of the cut faceplate around X
Rotation 0 Rotation angle of the cut faceplate around Y.
Rotation Z Rotation angle of the cut faceplate around Z.
Edge Profile Via a click on the button you change to the level of profiles in the Element Manager. You can select a profile and assign it to the cut faceplate.
Technology Data Via the Technology data the used tool for the machining can be defined.
Add With this function manual modifications of a cut faceplate are effective. The set values in the top part of the dialog are taken for the current selected cut faceplate in the bottom list.
New Via this function you create a new cut faceplate. If you activate the function, a new cut faceplate with the set data in the top part of the dialog is inserted.
Delete With this function you delete the currently selected cut faceplate.