Visu Manager

Access

Ribbon : System > Order > Visu Manager

General

The Visu Manager is divided into the areas Mode and Settings.

Inside the area Mode you can see six editable detail levels. To select on of these levels move the controller to the desired level. Inside the area Settings you can see the the parameter of the chosen detail level.

Options

Mode With the help of this field you can define the name of the detail level. The name is freely editable. But you are not allowed to use more than 30 characters.
Planning mode

Choose whether you want to plan in 3D or 2D. You can change the mode at any time.

3D construction: Select the "3D Design" mode to plan in 3D.

2D planning: Select the "2D Planning" mode if you want to plan computationally intensive orders in 2D to save system resources and enable faster graphical planning of articles in floor plans. See Large-scale planning: 2D planning mode .

Type Definition

With the help of the Type Definition you can define which parts shall be handled as front elements.

A click on the button beside the entry will open up an additional dialog.

See also Type Definition

Visualization

With the help of the Visualization you can define how front elements and miscellaneous elements shall be illustrated.

A click on the button beside the entry will open up an additional dialog.

See also Visualization

Visualize Installations

If activated, installations/ outlets will be visualized in the exploded view.

The definition whether an article is an outlet is determined in the Article Principle under the node “Details”.

Visualize Connectors By deactivating this function no connectors are illustrated in the drawing.
Show Interior Parts By deactivating this function no interior parts (e.g. adjustable shelves) are illustrated in the drawing.
Show Cutting Pattern Parts

Controls the visibility of cutting pattern parts in the order.

Tip: To show or hide cutting pattern parts in Document Manager viewports , assign an appropriate level in the Visualization Level field under Document Manager principle >section Layout >section Viewports >Viewport row >Attributes.

Description You can type a text that describes the settings of the selected visualization mode.