Object Designer

Access

iXplorer > Elemense Palette: Details > [Object Designer selected] > Elements Palette: Parametrics

Ribbon menu: Article > [Create an Object Designer] > Elements Palette: Parametrics

iXplorer Article Center > [Mouse over article name] > Parametrics (spanner icon)/ Insert and edit article > [Insert in drawing area] > Elements Palette: Parametrics

[Select root node in the scene graph] > iXplorer Methods Palette > [Method to create Article or Object Designer] > Elements Palette: Parametrics

[OD or OD sub-element selected in the scene graph] > iXplorer Methods Palette > Edit article > Elements Palette: Parametrics

[Select an article or one of its child elements in the scene graph] > Ribbon menu: Designer > Edit article > Elements Palette: Parametrics

General Information

The Object Designer is a module for free construction of counters, reception desks and single parts. The Object Designer is based on a 2D AutoCAD drawing in the top and side view.

The Object Designer works with so called segments, contours, cross-sections and paths. These elements are linked during the process. The parts generated from these refer to the position in the top view and to the height in the side view, analogous to a 3D projection. In addition suitable Article Designer articles from the Article Center can be inserted in an Object Designer Construction. For example, this helps with inserting drawer articles.

Procedure

  1. You require 2D top view and side view drawings of the furniture that serve as templates/ references. You may draw it yourself in the DWG file of the order or load an existing DWG drawing. Load the file with the import method "DWG in"; you can find it in the ribbon menu tab Output.
  2. Constructing an Object Designer takes place in the Parametrics mode of the iXplorer. It can be activated in different manners. Here, we will select the root node of the Elements Tree and launch the method "Create Object Designer" in the Methods palette. As a result, the Elements palette switches from the Details tab to the Parametrics tab, which is now active. (More procedures for activating the Parametrics tab are listed here .)
  3. The Parametrics tab lists existing Object Designer segments in a tree. Select the OD root node of the tree, before you continue to assigning initial entities (templates).

At this point, the Object Designer and all changes you make to it are only temporary, because we did not click Apply (check-mark icon) in the dialog's tool bar yet. You can apply or discard (x) the changes you made at any time.

Before each of the following steps, remember to select the Object Designer article on its highest level in the parametric tree (not the root node).

  1. Click the method "Select initial entities" and select all drawing elements of the top and side view and apply the selection with a right-click or with ENTER.
  2. Then, create Object Designer segments, contours, SPPs, articles or extrusion paths by using the respective method in the Methods Palette and by tracing the templates (initial entities) in the top view as well as in the side view. If need be, change parametric properties in the Properties palette before creating the parts.

Note: 2D-Objects, that you apply "Select Initial Entities" on, will be tied to the Object Designer data. So when you edit an Object Designer in the Parametrics tab, the initial entities will be loaded and displayed in the drawing area. As soon as you exit the Parametrics tab, the initial entities will disappear in the drawing area.

Tipp

While drawing segments press the space bar to either resume a command or to apply it.

  1. Before you combine two segments to create a part, you can select one of the segments to adjust its properties. For example, you can assign a material to the segment that will be assigned to the resulting part respectively.
  2. Finally, link top and side view pairs with each other with the method "Parts from two views" to generate the parts: select a top view segment and its corresponding side view segment and right-click to apply the selection. This will generate the part; Repeat the step with the remaining segments.
  1. In the Parametrics tab's tool bar, click Apply to save your progress.

Applying different attributes (e.g. applying a different material) to an OD-part already created , must be done via the Details tab elements tree where the parts are actually listed.

  1. Now, save the finished Object Designer. For this, got to the Details tab (!), select the root node or the Object Designer article's node in the elements tree and click on "Save Article" in the Methods palette; if the root node is selected, you will be asked to select the Object Designer in the drawing area. The Save Article dialog opens. Type in an article name and click Save.

    Saving the Object Designer article only includes the elements that are relevant for generating the article parts. Further information for the application of these Object Designer Articles is in the DWG-Format in the \SYS\ObjectDesigner . The saved DWG in the directory must be loaded when inserting an article from the Article Center.

The article must necessarily be finished when you save it - you can still make changes afterward and save it with the same article name.

Tip: When you make an error while creating the contours, segments, parts, articles or SPPs, you can easily delete the corresponding element in the Parametrics tab's tree.

  • Either right-click the faulty element in the Parameter tree and click Delete in the context menu or
  • Select the faulty element in the drawing area and right-click>Delete. Mind the elements that you select or you might end up deleting parts of the article or the initial entity.

In the structure tree, you can also select and delete multiple elements at once.

Refer the related topics for more information.