Object Designer - Matrix
Access
Ribbon : Article > iX Designer > Object Designer Article
[ Root node selected in the iXplorer scene graph ] > iXplorer Methods Palette > Object Designer Article
General Information
Topview segment and sideview segment
If generating the parts from these segments is completed, the part name as well as the material from the PD of the topview element is prevailed. The element of the sideview only transfers the height of the part.
In this combination the element of the topview is significant for the resulting generated part. It defines the position of the part in the drawing. The sideview segment adds the part height to the generated part.
Example:
Suitable for creating standard parts (rectangular parts).
Topview contour and sideview segment
If the generating of the part from these OD components is completed, then the part name and profile application of the topview contour are prevailed. The element of the sideview transfers the referenced height on Z=0 and the selected material of the part definition.
The position of the sideview segment if horizontal or vertical is not important at this point. Just the information of the PDis evaluated. It is only important when several parts from the sideview are arranged to one another relating to the height and the WKS with Z=0.
Example:
Free form parts, table top etc.
Topview segment and sideview contour
If the generating of the part from the segments is completed, then the part name and the profile application, PD and the height of the contour are prevailed. If the fields in the properties are not filled completely with values, then the material of the topview segment is taken.
Sideview contour must be equivalent to the length of the the topview segment.
Example:
Free form parts, counter construction, bed construction etc.
Extrusion paths and segments
If the generating of the part with the path and the segment is completed, then the part name of the topview path is prevailed. The element of the sideview transfers the height and the selected material of the part definition. In addition an insertion point must be selected when applying paths. It is important with this combination that the segment of the sideview with the material allocation is applied with the part definition or directly with the category material. The part name is taken from the paths if already selected.
Extrusion paths can only be defined in the topview!
Example:
Curved parts, counter construction
Stretchable purchased part and extrusion paths
If the generating of the SPP with the path and the cross- section is completed, then the part name of the topview path is prevailed. The element of the sideview transfers the cross- section. SPP can be defined in the top- and sideview. The generated SPP does not appear in the part list but instead in the purchased part list.
Depending on the path direction, the profile can be reversed in the opposite direction.
Example:
Metal cross- sections for the furniture-, wall- and ceiling-, guide rail construction
Topview SPP and Polyline
If the generating the SPP with the path and the cross-section is completed, then the name of the SPP is prevailed. The polyline defines the height from the sideview and transfers the cross-section name as a first priority. The SPP appears in the purchased part list where the price/ lfm are shown.
Example:
Furniture feet, metal support, spacer, etc.
Article segments
If the generating of the article with the sideview and the topview is completed, then please note that the desired article should have been selected before.
Here again the height is determined by the sideview-article segment.
Example:
Modular counter construction, fitting of drawer elements etc.
Related topics:
- Object Designer
- Object Designer Functions
- iXplorer - Parametrics