Roomplan - Walls
Access
Ribbon : Room > Room > Room plan
Define room
First you have to click on the icon Create new room
. A closed, basic sized room of 5m x 4m is
then inserted into the drawing.
If you wish to create the room based on a polyline, click the icon Create Room
from Polyline . 
Before you can use this function, you must have an existing Polyline in imos which builds the floor plan of the wall.
You must ensure that a closed room is always created and that the walls are placed at the outside of the room.
The dimensions and properties can be changed subsequently.
By default, the software suppresses the display of walls (including windows and doors) that would otherwise be positioned between the observer and the inside of the room.
Insert free form wall
Draw a free form wall inside your room. With every left-click another wall can be appended to the preceding. Apply the insertion process with ENTER or right-click.
Note: A ceiling and floor are not generated when drawing a "closed" room with this tool; rather use Create new room or Create room from polyline .
Options
If activated, the command line offers further options.
| Links | Wall orientation: the insertion point will be located on the left of the wall |
| Centric | Wall orientation: the insertion point will be located in the center of the wall |
| Right | Wall orientation: the insertion point will be located on the right of the wall |
| Bent | Draw a bent wall by defining two coordinates of the arc. |
| Back | Deletes the wall drawn last. |
Insert Corner
To insert a corner into a room click the icon Insert Corner
.
Before you select this function a room must have already been defined.
A corner then replaces the mouse pointer, which can then be dragged to any corner desired of the existing room. To fix the corner in place click the position at which you wish to create the corner. Corners can also be created at several places in a room.
Insert Slope in Room
To insert a slope or rather a diagonal in a room corner click the icon Insert
Diagonal
.
Before you select this function a room must have already been defined.
A diagonal then replaces the mouse pointer, which can then be dragged to any corner desired of the existing room. To fix the diagonal in place click the position at which you wish to create the slope.
Insert square/ round pillar
Insert a square
or round
pillar
in the room per
left-click.
Change properties
The room height is displayed for each wall element; however, the changes are global, which means all walls in a room are always the same height.
Change the wall thickness and pillar width in the Properties.
In the planning phase you can define the “ materials ” used for the walls, floors and ceilings . To do so, you will need to switch to the Color Principles in the Element Manager and select the respective check boxes Use at wall, Use at ceiling or Use at floor.
To assign a material to a wall, simply select the corresponding element in the drawing and then select the wall material in the Properties palette. Colors/ materials available in the drop-down list are determined in each Color Principle in the Element Manager; the option "Use at walls" is activated in the principle.
Change properties
| Wall Thickness | Enter the wall thickness in mm. |
| Height | Enter the wall height in mm. |
| Length | Enter the wall length in mm. |
| Keep Orientation | If active: When you move a point of a selected wall, the wall's orientation will be retained. The length of adjacent walls is adjusted. |
| Angle | Enter a corner angle. The angle runs counterclockwise. 0° and 180° lie on a line parallel to the X-axis. |
| Material | In the drop-down list, select a color of your choice. Customize the drop-down list by activating or deactivating the check-box Use at walls in the respective Color Principle. |