Roomplan - Roof
Access
Ribbon : Room > Room > Room plan
Create roof
To insert a roof, click on the icon Roof
. Opens a new dialog for the definition of the parameters. If you leave the
dialog with of, you have to select the wall where the roof should be created.
Afterward you have to define the direction to tilt the roof.
Only one roof element can be created with each call!
Following parameters can be defined:
| Ceiling Line Height | Ceiling line height in mm. |
| Room Height | Room height in mm. The default room height is the wall height. Combining two roofs can change the wall height. |
| Roof Depth |
Defines the value in x direction in mm, where the roof cuts the ceiling.
If the flag Roof Angle is activated the Roof Depth is deactivated and the measurement is then calculated by the relationship of ceiling line height and room angle plus Roof Depth. If the Roof Depth is deactivated the actual value for the depth will still be shown. |
| Roof Angle |
Roof Angle in Degree.
If the flag Roof Angle is activated the Roof Depth is deactivated and the measurement is then calculated by the relationship of ceiling line height and room angle plus Roof Depth. If the Roof Depth is deactivated the actual value for the depth will still be shown. |
| Roof Overhang |
Roof overhang in mm. The entered distance is calculated vertical to the wall. |
| Roof |
Measurements in mm. The thickness has no influence on the imos construction. It is only for visualization. |
Merge Roof Elements
With this function Merge Roof Elements
, you can merge 2 roof elements. Start
the function and select the roofs. The 2 elements will be merged
automatically.
Apply walls to roof
With this function Apply walls to roof
you can apply walls to a roof element.
First select the walls and after that select the roof element!