Roomplan - Windows
Access
Ribbon : Room > Room > Room plan
Inserting and positioning
Just select the needed principles to insert a window. The window will be inserted in the drawing with the default dimensions and can be positioned manually at the walls.
It should be noted that windows have to be placed in a wall!
Use the AutoCAD snap functions to position the window. Several windows can be inserted consecutively. Press Enter to end the insertion process.
Place room objects with the aid of dynamic dimension input:
If the room object snaps a wall, the distances to the next room object or to the next corner are automatically displayed. Switch to dynamic dimension input using the TAB key; each time the TAB key is pressed the cursor jumps to the next field of four (distances left and right to the interior and exterior sides of the wall).
Enter a distance and press ENTER to confirm your input.
Change properties
| Opening angle |
The setting of the opening angle defines the degree of opening of the casement in the drawing.
The settings are only visible when you are in top view! |
| Width / Height | The width and height define the overall dimensions of the door. |
| Distance | Distance to the closest edge. |
| Height of breast | The breast height is the distance from the floor to the bottom edge of the window. |
| Frame | In the drop-down list, select a color of your choice. Customize the drop-down list by activating or deactivating the check-box Use at windows and doors in the respective Color Principle. |
| Sash | In the drop-down list, select a color of your choice. Customize the drop-down list by activating or deactivating the check-box Use at windows and doors in the respective Color Principle. |
| Glass | In the drop-down list, select a color of your choice. Customize the drop-down list by activating or deactivating the check-box Use at windows and doors in the respective Color Principle. |
| Style | Select a window style from the drop-down list. The Color principles that were used in combination with the original object style are adopted in the newly selected style as far as possible. |
Grips
In addition, using the new grips you can quickly alter the direction a door opens and the stop that are displayed when a door or window is selected: the arrow grip on the door leaf changes the direction of opening, the arrow grip in the middle of the doorway arch changes the stop. You can subsequently alter the distances by clicking an arrow to the left or right of the door frame and then entering the new distance in the dynamic dimension input field. You can also move a door or window to the left or right as desired by means of the square grip.
The distances are also displayed when you move the mouse pointer over the object.