Color Principles
Access
Ribbon : Main data > Main data > Element Manager > Materials, Surfaces, Profiles > Color Principles
Organizer > Tab Element Manager > Materials, Surfaces, Profiles > Color principles
General Information
In a color principle, you manage settings for a photorealistic display of a surface.
Options
Default settings
| Material |
In the dropdown Box next to the entry are all available existing materials. A *.DWG with the same name in the IVIS-Directory is stored for every material. If a material is selected from the list you can influence the display of the material by the lower parameters.
This setting is only available in the CAD Element Manager, not in the Organizer Element Manager. |
| Rotation | The entered value defines which angle is used for projecting the color principle on the surface. |
| Scale |
Scaling can reduce or increase the color principle. If the standard value 0 has been entered, the color principle is scaled and stretched so that it fits exactly on the dimension of the respective part. If another value is entered as 0, the mapping is calculated as follows: Part dimension : Scaling = Number of tiles Example: The scaling 500 is used for a part with a width of 1500 mm and a height of 1000 mm: Width > 1500 : 500 = 3 (The colour principle is projected three times in the width) Height > 1000 : 500 = 2 (The colour principle is projected twice in the height) |
| Use at wall |
If the function is activated, the color principle is available in the roomplan for the walls .
It is possible for several color principles to be selected at the same time. |
| Use at floor |
If the function is activated, the Color principle is available for the floor in the roomplan.
It is possible for several color principles to be selected at the same time. |
| Use at ceiling |
If the function is activated, the color principle is available in the roomplan for the ceilings .
It is possible for several color principles to be selected at the same time. |
Commercial information
| Color code 1 |
Freely editable information field. The entered value defines the cost of the Color Principle per square meter. A variable number or a variable text can also be entered. If the field 'code 1" has a value, the manufacturing costs for the color principle can be calculated during the calculation.
Variables are not allowed in this case. The enter value of color code 1 is attached to the principle name. |
| Color code 2 |
Freely editable information field. The enter value of color code 2 is attached to the description. |
| Cost [€/m²] | The entered value defines the cost of the Color Principle per square meter. |
| Mark up Factor | The calculation factor is a multiplier for calculating the costs. The value 1.1 is the surcharge of 10%. |