Surfaces
Access
Ribbon : Main data > Mdain data > Element Manager > Materials, Edges, Surface > Surfaces
Organizer > Tab Element Manager > Materials, Surfaces, Profiles > Surfaces
General Information
All technical information is summarized in a surface. A surface can be assigned to a part definition.
Options
Default settings
| Category |
With the support of this function you can allocate a category to the surface to filter or group in the part list. Additionally, the category defines the applied hatching for cuts. Via a click on the button behind the entry you will switch to the level of Material Category . |
| Color Principle |
The color principles have an effect on the visual display as well as the final description. With a click on the button next to the entry you change into the level of the color pr inciples. The dropdown box contains the last used principles. |
| Grain | The function describes if the coating has a grain. If the grain is activated, the direction has to be considered by transferring the cut optimizations. |
Commercial information
| Order number | Enter the purchase item ID of the surface. The entered value is only evaluated for internal purposes. |
| Description 1 | Description of the surface. This entry can be more detailed than the coating principle. This entry is taken in the imos part list. |
| Description 2 | Description of the surface. This entry can be more detailed than the coating principle. This entry is taken from a connected branch program. |
|
Generate parts in part lists and BOM Create |
When this flag is set, a single part will be created for the profile in the BOM and cut list. This part will be made in the material entered below it. |
| Supplier | Supplier respectively manufacturer of the surface. |
| Cost per m² | Entry on the cost of the surface part per running square meter. |
| Mark up Factor | The calculation factor is a multiplier for calculating the costs. The value 1.1 is the surcharge of 10%. |
| Notes | Enter a description or notes for the coating. |
Sizes
| Thickness |
The thickness of the coating (finished dimension) considering all machining like grinding, varnishing etc. The thickness is used for calculating the finished part thickness. Thereby the thickness of the surface is added to the thickness of the core material. |
| Raw thickness | Raw thickness of the coating (raw dimension) which is applied for the order. The raw thickness of the surface can be greater than the finished dimension if still grinding, for example. |
| Oversize X | X-Oversize per edge. With an oversize of 10 mm a complete surcharge of 20 mm is calculated. |
| Oversize Y | Y-Oversize per edge. With an oversize of 10 mm a complete surcharge of 20 mm is calculated. |
Machining data
| Machining Class |
This data is needed to generate correct NC programs. We differentiate between nine machining classes for the different surfaces. Which parameter is used for which values can be defined. |
| Surface Type |
The surface type is for the categorization of coatings and can be applied in the part list. The entries veneer , plastic foils and others (e.g. HPL,DKS) can be selected. |