Materials
Access
Ribbon : Main data > Main data > Element Manager > Materials, Edge, Surface > Materials
Organizer > Tab Element Manager > Materials, Surfaces, Profiles > Materials
General Information
All organizational and manufacturing technical information is summarized in a material. The organizational data is taken over in the part list and the manufacturing technical properties are used for generating NC-Programs and parts.
The material can be allocated to a part definition.
Options
Default settings
| Material Category |
With the support of this function you can allocate a category to the material to filter or group in the part list. Additionally, the category defines the applied hatching for cuts. Via a click on the button behind the entry you will switch to the level of Material Category . |
| Color Principle |
The color principles have an effect on the visual display as well as the final description. With a click on the button next to the entry you change into the level of the color principles. The dropdown box contains the last used principles. |
| Grain | The function describes if the coating has a grain. If the grain is activated, the direction has to be considered by transferring the cut optimizations. |
Commercial information
| Order number |
Enter the purchase item of the material. The entered value is only evaluated for internal purposes. |
| Description 1 |
Description of the material. The entry can be more detailed than the name of the principle. This entry is transferred in the imos part list in the field MATNAME. The name of the material principle is written down into field MATID. |
| Description 2 | Second name of the material is for administration purposes. |
| Supplier | Supplier respectively manufacturer of the material |
| Price [€/m²] | The entered value defines the cost of the material per square meter. This entry is multiplied with the calculation factor in the part list and is taken then. |
| Mark up Factor | Multiplier for calculating the material costs. This factor is multiplied with the costs and the result is the retail price for the material. The value 1.1 is the surcharge of 10%. |
| Dimensional weight [kg/m³] |
The entered value defines the weight of the material (kg per cubic meter). The dimensional weight of the part can be calculated from the entered value and the part dimensions.. |
| Comment | Enter a description or notes for the material. |
Sizes
| Thickness | The thickness of the material (Finish size) for calculating the finished part thickness. If necessary, the thickness of the surfaces can be added to the thickness of the material. |
| Raw thickness | Final thickness of material, which is necessary for the dimensioning and the surface thickness is added as well. The raw thickness of the material can be bigger than the finished dimension if it has to be grinded. |
| Oversize X | X-Oversize per edge. With an oversize of 10 mm a complete surcharge of 20 mm is calculated. (a variable is a valid value) |
| Oversize Y | Y-Oversize per edge. With an oversize of 10 mm a complete surcharge of 20 mm is calculated. (a variable is a valid value) |
Core material*
These entries control the panel materials for nesting.
*) *) These entries are only available with iX CAM Nesting enabled.
| Panel in X | Length of the core material in X. |
| Panel in Y | Length of the core material in Y. |
| Grain |
Just available for materials with grain. Defines the grain direction for the core material. Available options:
|
| Number | To ensure that no more panels of a certain size are used when generating nesting parts than are theoretically in stock, you can specify the maximum number of panels here. Nesting takes the quantity into account to decide how many high priority core material panels to cut before switching to the core material of the next lower priority. |
Machining data
| Machining Class | Material class are defined by the machining class. This machining class are evaluated by imos CAM. Thereby you can assign a tool groups for formatting to each material class. |
| Surface Index |
The surface index describes if the material has been pre-coated. This is considered by transferring the cut optimizations. You can select the entry raw , pre- veneered and coated . |