Profiles
Access
Ribbon : Main data > Main data > Element Manager > Materials, Surfaces, Profiles > Profiles
Organizer > Tab Element Manager > Materials, Surfaces, Profiles > Profile
General Information
Profile data is based on narrow part areas. Profile Principles are used in imos to set up information about panel edges used in constructions. Any edge treatment (also PVC edgebanding) is considered to be a profile. Profile data libraries are created, changed and managed at the level of profiles.
A profile can be assigned to a part definition.
Procedure
To set up a new profile height click on the grey plus next to the entry profile. An additional row will be displayed in the bottom grid. The value entered in the new row corresponds with the profile height .
For a detailed definition of the profile properties, click on the grey plus next to the entry.
For saving the set properties of a profile height for all profile heights, the relevant field must be marked with a right mouse click and click the function save for all profile heights in the context menu.
Options
Different height classes can be defined for every profile. Each of these height classes can be allocated to individual parameters. And therefore different purchase heights with different prices for solid wood profiles can be displayed.
Several profiles can be applied to every profile in the grid. imos automatically selects for the material thickness the suitable height for the profile in the part definition. If the profile has no defined profile height with an exact suitable value, imos accesses to the next greater profile height.
The advantage of the profile heights is that e.g. different raw heights with various prices for solid wood profiles are displayed without having to always apply a new profile.
Basic settings
| Geometry |
The variable contour describes the graphic display of the profile. The contour can be applied and modified in the imos Contour Editor Via a click on this function you will switch to the level of the profile geometries. The dropdown box contains the last used geometry. |
| Color Principle |
The color principles have an effect on the visual display as well as the final description. With a click on the button next to the entry you change into the level of the color principles. The dropdown box contains the last used principles. |
| Material Category |
With the support of this function you can allocate a category to the surface to filter or group in the part list. Additionally, the category defines the applied hatching for cuts. Via a click on the button behind the entry you will switch to the level of Material Category . |
Commercial information
| Order number | Enter the purchase item of the profile. The entered value is only evaluated for internal purposes. |
| Description 1 | Name of profile. This entry is transferred in the imos part list in the field PRFNAME. Furthermore, the principle name is written in the field PRFID. |
| Description 2 | Second name of the material is for administration purposes. |
|
Generate parts in part lists and BOM Create |
When this flag is set, a single part will be created for the profile in the BOM and cut list. This new part will be made in the material entered below it. |
| This synchronization (consistency check) can be carried out for the following data types: | This material is used if a separate part should be created for the profile. |
| Supplier | Supplier respectively manufacturer of the profile. |
| Color | The profile color can be written in the part list. Whereas, it is advisable to use the color principles. |
| Price [$/m] | Entry on the cost of the profiles per running meter. This entry is multiplied with the calculation factor in the part list and is taken then. |
| Mark up Factor | Multiplier for calculating the profile costs. This factor is multiplied with the costs and the result is the retail price for the profile. The value 1.1 is the surcharge of 10%. |
| Notes | Enter a description of a note for the profile. |
Sizes
| Raw height | Raw height for the profile. This value can be greater than the finished dimension if e.g. milling and grinding machining are executed. |
| Thickness |
Thickness of the profile. This value is used for the calculation of the raw dimension and cutting dimension. Further details are in the parameter Profile machining below. |
| Raw thickness | Purchase thickness of the profile. This value can be greater than the given thickness if e.g. milling and grinding machining are executed. |
| Offset profile length | The offset extends the length of the profile. For example, if 10 mm is entered, the profile part is 20 mm longer. When calculating the length, the edge trims are also considered. |
|
Additional Oversize for Core material |
The additional oversize is for modifying the cutting dimension of the core material to the entered amount. This function is applied for milling in panels or for plastic edges; material for machining remains. |
|
Disable offset of core material Suppress |
If the function is activated, the offset of the core material is disabled. This function is used on solid wood edges that are directly applied on the core material. |
Machining data
| Profile material | The profile material can be written in the part list. CAM-Parameters like gluing parameter or milling strategies can be combined as well. |
| Profile machining |
Machining Undefined The profile thickness does not have any effect on the calculation of the measurements, graphics, part list or CNC program. The dimensional reference is the finished dimension. Machined Profile: The profile is applied on milled profiles. The profile is applied with profile milling so that the profile is directly milled on the panel. The offset can be added in the profile. The edge thickness has no effect on the CNC-generation. The profile is visualized and can be output in the BOM. Edgebanded Profile The profile is applied on edgebanded profiles The profile is glued. It is inserted for formatting and glueing options on the CNC. The raw dimension calculation results from subtracting the edge thickness It creates a glue object (GLUE) for CNC output. CAM creates a zero offset depending on the sequence. Edgebanded profiles: No effect on CAM! The part has a prefabricated profile. This entry has no effect on the calculation of the dimensions. By CNC-Generating a format machining might be disabled. Solid Lumber Edge: A solid wood edge is glued on. The raw dimension calculation results from subtracting the edge thickness You can set as a single part in the BOM. Solid Lumber Edge : No effect on CAM! For calculation of the dimensions the panel thickness is added to the size. Softforming: This parameter has no influence in CAM. Machining & Edging The profile is applied on edgebanded profiles It is used for milling without the evaluation of the machining class categories of the chip board. Glue options are possible. The raw dimension calculation results from subtracting the edge thickness The panel is grooved and applied a pre-profiled material. CAD only visualized the profile. The machining of the groove can be defined in CAM or has to be defined as a groove in the part. Solid & Machining: The profile is applied on solid wood edges. It is used for formatting on the CNC. As long as the solid wood edges provide a relevant offset for the machining, you can evaluate with considering an offset dimension. The panel is produced regarding raw dimensions. The massive wood profiles are applied afterwards. As a third level working the profiling is done. Edgebanding and Preformating This parameter has no influence in CAM. |