Contour Wizard
Access
Ribbon : Tools
General Information
You can set up profile- and contour geometries in imos with the help of the Contour Wizard.
Options
The Contour Wizard is divided in two levels each starting with a question.
On the first level you can decide which type of contour or which type of element or article should be created:
Which type of contour do you want to edit?
| Outside contour |
Create or edit an outer contour. An outer contour can e.g. be assigned to the edge of a part definition. |
| Inner contour |
Create or edit an inner contour. For example, an inner contour can be allocated as a cutout to a part via the part definition. |
| Profile Geometry |
Create or edit a profile geometry. This may then be assigned to a profile. |
| Section Geometry |
Create or edit a section geometry. Is used for the definition of the stretchable purchased part. |
| Outline Geometry |
Create or edit an outline geometry. This may be assigned e.g. to a part definition or an article. |
You will get to the second level of dialogue box after you have selected one of the first five functions in the first window and click on Continue .
What would you like to do?
| Draw Contour in AutoCAD |
With the help of this function you can create a new contour in the drawing area. After you have started the function invites you to insert the sample dimensions for the drawing. After that you will switch to the drawing area where you can draw the contour. imos starts automatically the function polyline. |
|
Select contour in AutoCAD and create new contour |
The drawn contour will be saved in the Element Manager. Condition for this function is that there is already a polyline (contour) in the drawing area. After calling the function, you are required to a name for the contour which used for saving in the Element Manager. After that you will switch to the drawing area where you can select the contour. |
| Edit existing contour | The Element Manager is opened and the contour can be changed (e.g. relative or absolute parts, reference coordinate system etc.). Lines cannot be added or deleted in the Manager. |
|
Show existing contour in AutoCAD Visualize |
If an existing contour shall be used e.g. as a template for a new contour you can choose the existing contour and open it in the drawing area where you can modify it. After that you can start the Contour Wizard again and save the modified contour with the function Select contour in ACAD and create new contour . |