Drilling editor
Access
> > Manager > Tab Details > Select machinings in the element window imos Methods window Drillings
Article Designer > Tab Part > Add machining > Dialog Machining > Drills
General Information
Inserting, modifying or deleting a drilling in a part can be made with the editor drilling.
Options
In the top section of the dialog you can define the data of the drilling. In the bottom section of the dialogue the data of the drilling, that already exists in the part, is displayed in a list. By selecting a drilling from the list in the bottom section, the fields in the top section of the dialogue are filled with the data of the selected drilling.
| Starting Point X | X-coordinate of the insertion point. |
| Starting Point Y | Y-coordinate of the insertion point. |
| Starting Point z | Z- coordinate of the insertion point The insertion point depends on the orientation of the drilling. |
| Linear Division | The division of the drillings can also be defined with linear division. The button is deactivated if the checkbox next to it is not activated. Above the button a dialog appears where a linear division for the insertion point in X, Y and Z can be entered. |
| Select | In the dialog editor drilling there are graphics displaying the selecting start points. It is also possible to modify the selection of these reference points by picking in the graphic with the mouse. The co-ordinate system is changed by selecting the corner points in the graphic. The entered coordinates refer to this corner point. This makes it possible to enter relative modifications. |
| Depth | Depth of the drilling in mm. |
| Diameter | Diameter of the drilling in mm. |
| Orientation |
Defines the orientation of the drilling. The drilling can have the following orientations:
Next to every selected orientation a graphic of this orientation scheme appears for a better overview. The four horizontal orientations apply to the edges of a part. The universal orientation allows the rotation of a workgroup through three axes. The input fields are activated as soon as the orientation UNI has been selected. |
| Orientation x | Rotation angle of the drilling in x-direction. |
| Orientation y | Rotation angle of the drilling in y-direction. |
| Orientation z | Rotation angle of the drilling in z-direction. |
| Countersink |
Drillings can be developed as normal drillings, countersink and step bores. The angle for the countersink is calculated by the entered diameter and depth. |
| Add | With this function manual modifications of a drilling are effective. The set values in the top part of the dialog are taken for the current selected drilling in the bottom list. |
| New | Via this function you create a new drilling. If you activate the function, a new drilling with the set data in the top part of the dialog is inserted. |
| Delete | With this function you delete the currently selected drilling. |