Circular pocket editor
Access
> > Manager > Tab Details > Select machinings in the element window > Methods window imos Macros Circular Pockets
Article Designer > Tab Part > Add machining > Dialog Machining > Circular Pockets
General Information
Inserting, modifying or deleting a circular pocket in a part definition can be made with the editor circular pocket.
Options
In the top section of the dialog you can define the data of the circular pocket. In the bottom section of the dialogue the data of the circular pocket, that already exists in the part, is displayed in a list. By selecting a circular pocket from the list in the bottom section, the fields in the top section of the dialog are filled with the data of the selected circular pocket.
| Starting Point X | X-coordinate of the insertion point. |
| Starting Point Y | Y-coordinate of the insertion point. |
| Starting Point z | Z- coordinate of the insertion point |
| Linear Division | The insertion point of a pocket can also be defined with linear division. The button is deactivated if the checkbox next to it is not activated. Above the button a dialog appears where a linear division for the insertion point in X, Y and Z can be entered. |
| Select | The adjoining graphic also offers the opportunity to change the reference points, which is done by clicking on the graphic. The co-ordinate system is changed by selecting the corner points in the graphic. The entered coordinates then refer to this corner point. This makes it possible to enter relative modifications. |
| Diameter | Diameter of the circle in mm. |
| Depth | Depth of the pocket in mm. |
| Orientation |
Definition of the orientation of the circular pocket. The circular pockets can have the following orientations:
Next to every selected orientation a graphic of this orientation scheme appears for a better overview. |
| Rotation X | Rotation angle of the circular pocket around X |
| Rotation 0 | Rotation angle of the circular pocket around Y |
| Rotation Z | Rotation angle of the circular pocket around Z. |
| Edge Profile | Via a click on the button you change to the level of profiles in the Element Manager. You can select a profile and assign it to the circular pocket. |
| Technology Data | Via the Technology data the used tool for the machining can be defined. |
| Add | With this function manual modifications of a circular pocket are effective. The set values in the top part of the dialog are taken for the current selected circular pocket in the bottom list. |
| New | Via this function you create a new circular pocket. If you activate the function, a new circular pocket with the set data in the top part of the dialog is inserted. |
| Delete | With this function you delete the current circular pocket. |