Workgroups editor

Access

> > Manager > Tab Details > Select machinings in the element window > Methods window imos Macros Workgroups

Article Designer > Tab Part > Add machining > Dialog Machining > Workgroups

General Information

Inserting, modifying or deleting a workgroup in a part can be made with the editor workgroup.

Options

In the top section of the dialogue you can define the data of the workgroup. In the bottom section of the dialogue the data of the workgroup, that already exists in the part, is displayed in a list. By selecting a workgroup from the list in the bottom section, the fields in the top section of the dialogue are filled with the data of the selected workgroup.

Starting Point X X-coordinate of the insertion point.
Starting Point Y Y-coordinate of the insertion point.
Starting Point z Z- coordinate of the insertion point The insertion point depends on the orientation of the drilling.
Linear Division The insertion point of a workgroup can also be defined with linear division. The button is deactivated if the checkbox next to it is not activated. Above the button a dialog appears where a linear division for the insertion point in X, Y and Z can be entered.
Select In the dialog editor workgroup there are graphics displaying the selecting start points. It is also possible to modify the selection of these reference points by picking in the graphic with the mouse. The co-ordinate system is changed by selecting the corner points in the graphic. The entered coordinates refer to this corner point. This makes it possible to enter relative modifications.
Name

The dropdown box contains the existing workgroups. Within the editor the workgroups cannot be edited but only selected and placed.

You can change to the Element Manager via the ellipsis button. Here it is possible to change the workgroup.

Orientation

Defines the orientation of the workgroup.

The workgroups can be generated with the following orientations:

  • TOP: vertical top
  • BOT vertical bottom
  • HXP horizontal (x positive)
  • HXN horizontal (x negative)
  • HYP horizontal (y positive)
  • HYN horizontal (y negative)
  • UNI Universal

Next to every selected orientation a graphic of this orientation scheme appears for a better overview. The four horizontal orientations apply to the edges of a part. The universal orientation allows the rotation of a workgroup through three axes. The input fields are activated as soon as the orientation UNI has been selected.

Rotation X Rotation angle of the workgroup in x-direction.
Rotation 0 Rotation angle of the workgroup in y-direction.
Rotation Z Rotation angle of the workgroup in z-direction.
Add With this function manual modifications (on the position) of a groove are effective. The set values in the top part of the dialog are taken for the current selected workgropup in the bottom list.
New Via this function you create a new workgroup. If you activate the function, a new workgroup with the set data in the top part of the dialog is inserted.
Delete With this function you delete the currently selected workgroup.