Lineboring editor
Access
> Manager > Tab Details > Select machinings in the element window > Methods window imos Lineboring
General Information
Inserting, modifying or deleting a lineboring in a part can be made with the editor lineboring.
Options
In the top section of the dialog you can define the data of the lineboring. In the bottom section of the dialogue the data of the lineboring, that already exists in the part, is displayed in a list. By selecting a lineboring from the list in the bottom section, the fields in the top section of the dialogue are filled with the data of the selected lineboring.
| Starting Point X | X-coordinate of the insertion point. |
| Starting Point Y | Y-coordinate of the insertion point. |
| Starting Point z | Z- coordinate of the insertion point The insertion point depends on the orientation of the lineboring. |
| Linear Division | The positioning of the lineboring can also be defined with linear division. The button is deactivated if the checkbox next to it is not activated. Above the button a dialog appears where a linear division for the insertion point in X, Y and Z can be entered. |
| Select | In the dialog editor lineboring there are graphics displaying the selecting start points. It is also possible to modify the selection of these reference points by picking in the graphic with the mouse. The co-ordinate system is changed by selecting the corner points in the graphic. The entered coordinates refer to this corner point. This makes it possible to enter relative modifications. |
| End Point X | X-coordinate of the end point. |
| End Point Y | Y-coordinate of the end point. |
| Endpoint Z | Z-coordinate of the end point. This point depends on the orientation of the lineboring. |
| Linear Division | The positioning of the lineboring can also be defined with linear division. The button is deactivated if the checkbox next to it is not activated. Above the button a dialog appears where a linear division for the insertion point in X, Y and Z can be entered. |
| Select | In the dialog editor lineboring there are graphics displaying the selecting end points. It is also possible to modify the selection of these reference points by picking in the graphic with the mouse. The co-ordinate system is changed by selecting the corner points in the graphic. The entered coordinates refer to this corner point. This makes it possible to enter relative modifications. |
| Depth | Depth of the single drillings in mm. |
| Diameter | Depth of the single drillings in mm. |
| Grid | The grid defines the distance between the single holes of the lineboring. |
| Orientation |
Defines the orientation of the lineboring. The machining can have the following orientations:
Next to every selected orientation a graphic of this orientation scheme appears for a better overview. The four horizontal orientations apply to the edges of a part. The universal orientation allows the rotation of a workgroup through three axes. The input fields are activated as soon as the orientation UNI has been selected. |
| Rotation X | Rotation angle of the drilling in x-direction. |
| Rotation 0 | Rotation angle of the drilling in y-direction. |
| Rotation Z | Rotation angle of the drilling in z-direction. |
| Direction | The lineboring can proceed in X-, in Y- and in X/ Y-direction. |
| Add | With this function manual modifications of a drilling are effective. The set values in the top part of the dialog are taken for the current selected drilling in the bottom list. |
| New | Via this function you create a new drilling. If you activate the function, a new drilling with the set data in the top part of the dialog is inserted. |
| Delete | With this function you delete the currently selected drilling. |