Stretchable Purchased Parts
Access
Ribbon : Main data > Main data > Element Manager > Parts > Stretchable purchased parts > Format 9.0
Organizer > Tab Element Manager > Parts > Stretchable Purchased Parts > Format 9.0
General Information
If a stretchable purchased part (SPP) is set as Format the 9.0 Fo rmat i n the settings, then the following options are available:
Default settings
| Open in Part Editor | Opens the SPP in the Part Editor . |
| Manufactured Part |
Defines the SPP as manufactured part. Materials and a surface can be additionally assigned to the usual settings for a manufactured SPP (in-house production). The complete sections part list info and calculation are hidden and not read out for this.
If a SPP is defined as a manufactured SPP, then all settings are displayed with the production information and not filtered like the other SPP. |
| Color Principle |
The color principles have an effect on the visual display as well as the final description. With a click on the button next to the entry you change into the level of the color pr inciples. The dropdown box contains the last used principles. |
| Cross-section | The allocated geometry defines the cross-section which is the shape of the stretchable purchased part. Via a click on this function you will switch to the level of the cross-section geometries. The dropdown Box contains the last used geometries. |
| Category | Define a Material category for the SPP. |
| Show from visualization level | Choose the corresponding visualization level from the Visu Manager. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Commercial information
Is only displayed when the SPP has been defined as Inhouse production part.
| Article number | Enter the article number for the SPP, it will be evaluated in the BOM. | ||||||||||||
| Order number | Enter the order number for the SPP, it will be evaluated in the BOM. | ||||||||||||
| Supplier | Supplier respectively manufacturer of the SPP | ||||||||||||
| Price [$/m] | The cost of the stretchable purchased part per running meter. This entry is multiplied with the calculation factor in the part list and is taken then. | ||||||||||||
| Mark up Factor | Multiplier for calculating the SPP costs. This factor is multiplied with the costs and the result is the retail price for the SPP. The value 1.1 is the surcharge of 10%. | ||||||||||||
| Weight [kg/m] | The cost of the stretchable purchased part per running meter. The actual weight results from the length-weight multiplied with the length. | ||||||||||||
| Serial part filter |
The Ident search finds several fitting serial parts; from the resulting set, the nearest fitting part is filtered by using configurable filter criteria. Definition of the Filter-String:
Examples: (Imperative for all: the search only takes place among serial SPPs with identical 2nd check-sums.)
|
Construction
| Finish size X |
The manufacturing dimensions represent the absolute dimensions of the cross-section in X direction. If the line elements in the cross-section have been set to relative, the section will be extended or compressed to the required size. The dimension will be evaluated in the Bill of Materials. |
| Finish size Y |
Not available if option manufactured part is checkmarked. The manufacturing dimensions represent the absolute dimensions of the cross-section in Y direction. If the line elements in the cross-section have been set to relative, the section will be extended or compressed to the required size. The dimension will be evaluated in the Bill of Materials. |
| Material |
Is only available when the option Inhouse production has been marked. You can define a material for Inhouse production part. Thereby materials can be exchanged via variables and accordingly visualized. |
| Surface |
This is only displayed if option manufactured part is checkmarked. Thereby surfaces can be exchanged via variables and accordingly visualized. |
| Wall Thickness | The wall thickness is used for creating hollow profiles. When activating the function, a wall of the set thickness is created along the inner section edge. |
| Reference point X | The entered value defines the position of the reference point in X. The reference point is aligned when extruding the stretchable purchased part on the extrusion path. |
| Reference point Y | The entered value defines the position of the reference point in Y. The reference point is aligned when extruding the stretchable purchased part on the extrusion path. |
| Contour process |
With the help of this function you can assign a contour to the stretchable purchased part. The contour defines the extrusion path for the SPP. Via a click on the button behind the entry you will switch to the level of outside contours. The dropdown Box contains the last used contours. |
| Linear Division |
Linear Division can be used to break the contour into pieces between the start and end points. For example, a linear division of 1:50 mm discontinues the stretchable purchased part by 50 mm exactly in the middle. The linear division 20mm:1:20mm shortens the stretchable purchased part at the beginning and end by 20 mm. |
Connectors
For assigning stretchable purchased parts to a new connection situation, click the grey plus next to connector .
Thereby a new row is appears in the grid with which a connection situation can be selected. For placing this connection exactly, click on the plus sign before the selected connection situation. Now the listed options appear below.
| Connection Situation | Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Linear Division | The linear division defines the number and position of the assigned connectors along the extruded stretchable purchased part. |
| Z Offset | The Z Offset shifts the connector in the Z axis. The offset is based on the reference point of the SPP. |
| Offset contour |
The connectors will be shifted in X-direction by the entered value. A positive value moves the connector to the left. A negative value moves the connector to the right. The offset is based on the reference point of the SPP. |
| Snap radius | The entered value defines the maximum distance of the snap radius. This means that imos searches for possible existing partner parts within the value and where appropriate, machining should be generated. |
| Rotation around Z-axis | The Z rotation rotates the connector around the Z axis. A positive value effects a rotation counterclockwise. A negative value effects a rotation clockwise. |
Following functions can be called on the sandwich button behind Connection Situation:
| New element | Thereby a new row is appears in the grid with which a connection situation can be selected. |
| Duplicate | Copies the selected row and inserts it with the same settings in the grid. |
| Copy row |
Copies the complete row with all settings. It can be pasted in another row or in another principle. |
| Insert row | Inserted the copied row at this place. |
| Delete | Deletes the selected column. |
Machinings
For adding a machining, click on the grey plus next to the entry each time so that a new grid can be inserted in which further definitions can be made.
The number next to the entries show how many machinings have already been allocated to each type.
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
| Drills | The number next to the entry shows how many drilling holes have already been allocated to the PD. A drilling can be added via the grey plus. The grid for the definition of the drilling will be opened. |
| Lineboring | The number next to the entry shows how many lineborings have already been allocated to the PD. A lineboring can be added via the grey plus. The grid for the definition of the lineboring will be opened. |
| Grooves | The number next to the entry shows how many grooves have already been allocated to the PD. A groove can be added via the grey plus. The grid for the definition of the groove will be opened. |
| Workgroups | The number next to the entry shows how many workgroups have already been allocated to the PD. A workgroup can be added via the grey plus. The grid for the definition of the workgroup will be opened. |
| Rectangular Pockets | The number next to the entry shows how many rectangular pockets have already been allocated to the PD. A Rectangular Pockets can be added via the grey plus. The grid for the definition of the Rectangular Pockets will be opened. |
| Circular Pockets | The number next to the entry shows how many rectangular pockets have already been allocated to the PD. A Circular Pockets can be added via the grey plus. The grid for the definition of the Circular Pockets will be opened. |
| Lock Pockets | The number next to the entry shows how many lock pockets have already been allocated to the PD. A Circular Pockets can be added via the grey plus. The grid for the definition of the Lock Pockets will be opened. |
| Cut faceplate | The number next to the entry shows how many faceplates have already been allocated to the PD. A Cut faceplates can be added via the grey plus. The grid for the definition of the Cut faceplates will be opened. |