Work group in part definitions

Access

Element Manager > Parts > Part Definition > Part Editor > Machining tab

Element Manager > Parts > Stretchable Purchased Parts > Part Editor > Machining tab

Options

Orientation

Defines the orientation of the workgroup.

The workgroup can have the following orientations:

  • TOP: vertical top
  • BOT vertical bottom
  • HXP horizontal (X positive)
  • HXN horizontal (X negative)
  • HYP horizontal (Y positive)
  • HYN horizontal (Y negative)
  • UNI Universal

For better visualization, the selected orientation scheme is displayed in the adjacent graphic for each chosen orientation. Only a universal operation can be rotated around three axes. The input fields are enabled once the UNI orientation is selected.

Orientation X

Rotation angle of the workgroup in x-direction.

Depending on the selected orientation, the value is either predefined or can be freely chosen.

Orientation Y

Rotation angle of the workgroup in y-direction.

Depending on the selected orientation, the value is either predefined or can be freely chosen.

Orientation Z

Rotation angle of the workgroup in z-direction.

Depending on the selected orientation, the value is either predefined or can be freely chosen.

Linear Division

The position of the workgroup can either be defined with fixed values for the start points in X, Y and Z or with a linear division.

If the checkbox 'Linear Division' is ticked, the X, Y and Z values can be defined using descriptors respectively.

Click the three-dot button to go to the Descriptors.

Starting Point X

X-coordinate of the insertion point.

Can also be defined by descriptors.

Starting Point Y

Y-coordinate of the insertion point.

Can also be defined by descriptors.

Starting Point Z

Z-coordinate of the insertion point. The insertion point depends on the orientation.

Can also be defined by descriptors.

Name Click the three-dot button to go to the Machinings.