Machining/ Workgroups
Access
imos Ribbon : Main data > Main data > Element Manager > Hardware and Machinings
Organizer > Tab Element Manager > Hardware and Machining
General Information
A machining (workgroup) can consist of one single working or several workings combined together. The working groups are allocated to the connector.
Procedure
For assigning a machining to a group, click on the grey plus next to machining . Then a new row is inserted in the grid and by clicking once in the row the desired type can be selected from the Pulldown Menu.
For making further settings for the type, click on the grey plus in the corresponding row to open the grid.
The available parameter depend on the selected type.
Options
The following types are available:
- Drilling
- Groove
- Rectangular pocket
- Circular pocket
- Contour
Parameter for machinings
Parameter for drillings
| Insertion point X/ Y/ Z |
The insertion point for the work groups is moved to the entered value into the corresponding direction. The initial point is the insertion point of the connector or the part which has been allocated to the work group. |
| Orientation X/ Y/ Z |
The orientation of the work group is rotated to the entered value into the corresponding direction. The initial value is for the orientation of the connector or the part which has been allocated to the work group. |
| Diameter | The entered value defines the diameter of the drilling. |
| Depth | The entered value defines the depth of the drilling. |
| Machining Type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Machine type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Info 1 | Freely editable information field. The entered text will be passed to the machining. |
| Info 2 | Freely editable information field. The entered text will be passed to the machining. |
Parameter for grooves
| Starting point X/ Y/ Z |
The start point for the groove is moved to the entered value into the corresponding direction. The initial point is the insertion point of the connector or the part which has been allocated to the work group. |
| End point X/ Y/ Z |
The end point for the groove is moved to the entered value into the corresponding direction. The initial point is the insertion point of the connector or the part which has been allocated to the work group. |
| Orientation X/ Y/ Z | The groove will be rotated around the entered value into the corresponding direction. |
| Width | The entered value defines the width of the groove. |
| Depth | The entered value defines the depth of the groove. |
| End form | You can select if the end of the groove should be round or angular. |
| Opening angle | This function defines the opening angle of the groove and therefore creates a groove which is sloped to the part surface. |
| Surface |
With this function you can assign a profile to the groove. Via a click on the button you will switch to the level of the profiles. The dropdown box contains the last used principles. |
| Machining | The dropdown box contains the entries saw and mill . Definition whether the groove is milled or sawed. |
| Machining Type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Machine type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Info 1 | Freely editable information field. The entered text will be passed to the machining. |
| Info 2 | Freely editable information field. The entered text will be passed to the machining. |
Parameter for rectangular pocket
| Insertion point X/ Y/ Z |
The insertion point for the work groups is moved to the entered value into the corresponding direction. The initial point is the insertion point of the connector or the part which has been allocated to the work group. |
| Orientation X/ Y/ Z |
The orientation of the work group is rotated to the entered value into the corresponding direction. The initial value is for the orientation of the connector or the part which has been allocated to the work group. |
| Depth | The entered value defines the depth of the rectangular pocket. |
| Surface |
With the help of this function you can apply a profile to the edges of the rectangular pocket. Via a click on the button you will switch to the level of the profiles. The dropdown box contains the last used principles. |
| Tool number | Is not yet evaluated in CAM. |
| Macro name | The value defines the direction to clean out the rectangular pocket. |
| Go-through depth | Extra through depth of the tool in mm. |
| Infeed | Infeed in mm |
| Speed | The rpm defines the speed of the tool (U/min). |
| Feed rate Z | Feed rate for the start point of the routing in Z-direction. |
| Feed rate XY | Machining Feed in m/min |
| Tolerance | Defines an extra depth in mm that has no influence on CAD. |
| Pocket length | The entered value defines the length of the rectangular pocket. |
| Pocket width | The entered value defines the width of the rectangular pocket. |
| Corner radius |
By entering a radius the corners of the rectangular pocket can be rounded off. The value defines the radius of the edge. |
| Machining Type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Machine type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Info 1 | Freely editable information field. The entered text will be passed to the machining. |
| Info 2 | Freely editable information field. The entered text will be passed to the machining. |
Parameter for circular pocket
| Insertion point X/ Y/ Z |
The insertion point for the work groups is moved to the entered value into the corresponding direction. The initial point is the insertion point of the connector or the part which has been allocated to the work group. |
| Orientation X/ Y/ Z |
The orientation of the work group is rotated to the entered value into the corresponding direction. The initial value is for the orientation of the connector or the part which has been allocated to the work group. |
| Diameter | The entered value defines the diameter of the circular pocket. |
| Depth | The entered value defines the depth of the circular pocket. |
| Surface |
With the help of this function you can apply a profile to the edges of the circular pocket. Via a click on the button you will switch to the level of the profiles. The dropdown box contains the last used principles. |
| Tool number | Is not yet evaluated in CAM. |
| Macro name | The value defines the direction to clean out the circular pocket. |
| Go-through depth | Extra through depth of the tool in mm. |
| Infeed | Infeed in mm |
| Speed | The rpm defines the speed of the tool (U/min). |
| Feed rate Z | Feed rate for the start point of the routing in Z-direction. |
| Feed rate XY | Machining Feed in m/min |
| Tolerance | Defines an extra depth in mm that has no influence on CAD. |
| Machining Type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Machine type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Info 1 | Freely editable information field. The entered text will be passed to the machining. |
| Info 2 | Freely editable information field. The entered text will be passed to the machining. |
Parameter for contours
| Insertion point X/ Y/ Z |
The insertion point for the work groups is moved to the entered value into the corresponding direction. The initial point is the insertion point of the connector or the part which has been allocated to the work group. |
| Orientation X/ Y/ Z |
The orientation of the work group is rotated to the entered value into the corresponding direction. The initial value is for the orientation of the connector or the part which has been allocated to the work group. |
| Contour |
You can define the contour with this function. With a click on the button next to the entry you change to the level of inner contours. The dropdown box contains the last used contours. |
| Machining Type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Machine type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Info 1 | Freely editable information field. The entered text will be passed to the machining. |
| Info 2 | Freely editable information field. The entered text will be passed to the machining. |