Groove construction
Access
imos Ribbon : Main data > Main data > Element Manager > Hardware and Machinings > Groove Construction
Organizer > Tab Element Manager > Hardware and Machining > Groove construction
General Information
In the Construction principles of the shelves, back panels, doors and partitions the groove construction can be activated via selecting a principles.
When inserting shelves that have a tongue, the matching groove has to be automatically applied at the sides.
Options
Machining
| Part 0 / 1 |
With the dropdown Box you can select if the groove should be sawed or milled. If you select milling , additional settings are shown. |
| Endform part 0 / 1 |
Only enabled if Part is set to Mill. Additionally, you can define a milled groove if the end of the groove should be round or angular. |
| Profile name part 0 / 1 |
Only enabled if Part is set to Mill. With this function grooves can be assigned to a profile. Via a click on the button you will switch to the level of the profiles. The dropdown Box contains the last used profiles. |
| Linear Division |
The linear division defines the ‘groove profile’ which is the shape of the groove. An uneven number of divisions should always be applied for the definition of the linear division. In doing so, the linear division is evaluated from the bottom to the top and therefore defines the groove edges. The 1., 3., 5. etc. value of the division formula has always a groove depth of 0. The even values, meaning the 2nd, 4th etc. value of the division formula, is given the full groove depth (the groove depth corresponds to the parts' overlap). Via a click on the button you change into the Descriptors and can define the Linear Division. |
| Machining Type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Machine type | Free defined text fields with the maximum of 4 digits. With the support of the entered value part can be filtered and allocated to special machines in imos CAM. |
| Info 1 | Freely editable information field. The entered text will be passed to the machining. |
| Info 2 | Freely editable information field. The entered text will be passed to the machining. |
Construction
| Additional Length front |
The groove length results from the dimension of the part which the groove generates. With this function the groove is extended forwards by the entered value. The description is shown in mm. |
| Additional Length behind |
The groove length results from the dimension of the part which the groove generates. With this function the groove is extended backwards by the entered value. The description is shown in mm. |
| Gap X1 / X2 |
With this function you can create an additional gap in the side panel. The entered value is given in mm. A negative value has an effect on the gap which is generated in the side panel. A positive value has an effect on the gap which is generated in the bottom panel, in the back etc. Via the definition of X2 it is possible to define an additional offset for a rabbet. |
| Gap Y | With this function you can create an additional gap in the side panel. |
| Gap Y top | By activating/deactivating the checkboxes, you can define if the gap should only be created on the top, only on the bottom or on both sides. |
| Gap Y bottom | By activating/deactivating the checkboxes, you can define if the gap should only be created on the top, only on the bottom or on both sides. |