Connector Set
Access
imos Ribbon : Main data > Main data > Element Manager > Hardware and Machinings > Connector Sets
Organizer > Tab Element Manager > Hardware and Machining > Connector sets
General Information
In a connector set the individual part connectors are combined. The connector set for a cam connection consists of e.g. a cam and a screw dowel.
The Connector Sets are divided in directions: The name of the directory is equivalent to the name of the connector type.
Procedure
Click on the grey plus behind Connector to assign a connector. A further row will be inserted in the grid where a connector can be selected.
For deleting an assigned connector again, call the context menu via the sandwich
button
in the corresponding row of the
connector.
Options
Default settings
| Usage frequency |
The value is automatically incremented if the connector set is used in a construction. The value can be reset to 0. |
Connector
The connector set is structured hierarchically so that there is a main connector to subordinate further components (accessories).
Attributes
These characteristics are catalog-characteristics.
With the support of the characteristics and the allocated value sections/characteristic values (Dropdown Box) the attributes are described which are important for the construction so that the connector set can be applied. The characteristics function as filter criteria. If an article is in imos created, the given part attributes are analyzed and compared with the characteristics. By doing this, only the connector sets are suggested which are suitable for the construction as well as the applied parts.
Additionally, read Constructive Connector characteristics
Add Characteristics
Click on the gray plus next to Attributes to Add an attribute. An additional row will be inserted in the displayed grid at the bottom. Then a further row is inserted in the displayed grid at the very bottom. In the column add the required characteristic can be selected from the dropdown list and assigned to the according value.
Delete Characteristics
Select the characteristic in the grid and delete the entry above the sandwich button at the end of the row.