Part Definition
Access
Ribbon : Main data > Main data > Element Manager > Parts > Part Definition
Organizer > Tab Element Manager > Parts > Part Definition
General
The Part Definition groups together information from the Material library, Surface library, Profile library and Machining library databases into a consolidated ‘sandwich’. All this information is saved under a name and can then be allocated to a part (construction principle).
The Part Definition also stores important technical data needed for the generation of NC programs. This additional information includes the edge trim, sequence of edge/surface application and the profile manufacturing sequence.
Part Editor
- adding machining operations
- configuring a multi-part element
Options
Default settings
| Category |
The category has no effect on the construction. The preview is only a guide for the data system. For example, if the category Panel is selected, the position and the edge application for a panel in the article is shown in the preview. This does not mean that the PD is only inserted as a panel. The actual position in the article depends on which construction principle has been allocated to the PD. |
| Part category |
The Part definition defines whether single part or multiple part is concerned. A single part consist of a single part definition. Several part definitions are assigned to a multiple part element Click the Open Part Editor button to open the Part Editor dialog, where you can edit in detail the respective part, multi-part or stretchable purchased part. You can also add machining in the dialog. Info: Multi-element parts are imos also called Multi-parts or MPE (English abbreviation). |
| Sample Dimensions X |
The sample dimension in X is only a guide for the data system. The actual part dimension depends on the construction. |
| Sample Dimensions Y |
The sample dimension in Y is only a guide for the data system. The actual part dimension depends on the construction. |
| Sample Dimensions Z | The sample dimension in Z derives from the thickness of the allocated material. |
| Manufacturing information |
Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
| Machining | Number of machining operations defined in the Part Editor. |
| Inner contour | Number of inner contour machining operations defined in the Part Editor. |
Part / Construction
| Core Material |
Via this field you can define the material for the part definition. The used material defines the sample dimensions of the part definition in Z. Via a click on the button you will switch to the level of the materials,where you can choose a principle. The dropdown box contains the last used principles. |
| Grain angle core material |
Is only displayed if the used material of the core material has a grain. The value defines the grain angle for the used material. |
| Surface top / bottom | Via a click on the button you will switch to the level of the surfaces,where you can choose a surface and assign it to the part definition. The dropdown box contains the last used principles. |
| Color top / bottom | In the info fields are just text fields. They have no effect on the color of the material or the surface. |
| Surface before Formatting | If the function is activated, the surface is applied before formatting the part. |
Edges
Sandwich Button
A complete row with all settings can be copied with the sandwich button at the end of the line and can be inserted in another row or also in another principle.
| Outline geometry |
An outline geometry can be assigned to the part definition in this way. That is required if the part is to have more than 4 edges or to have a non-right angled shape. Via a click on this function you will switch to the level of the outline geometry . The dropdown box contains the last used outline geometries. |
| Multiple parts element |
With the function you can assign a stretchable purchased part to an edge of the part definition. Via a click on the button behind the entry you will switch to the level of the Stretchable Purchased Parts. The dropdown box contains the last used SPP. |
| Trim SPP | Defines the trim of the assigned stretchable purchased part to the next stretchable purchased part. You can select the entry short , long , mitre and undefined. |
| Inherit connector machining |
Inheritance of connector machining on this edge
|
Settings in the grid:
| Edge 1 to n |
The number of the edges depends on the applied outline geometry. If no outline geometry is allocated, four edges will be listed. If the node is opened before the edge, further parameters for defining the edge are shown. |
| Trim | The settings for the trims between the active edge and the successive one are important for the edge modification sequence. You can select the entry short , long , mitre and undefined. |
| Surface |
Surface, Edge Undefined Choose this function if the edge is being processed in the post-forming method, as in this case there is no trim between the surface coating and the edge. Surface before Edge Choose this function if the surface coating is applied first, or if a pre-covered material is being used and the edge is then applied and modified. Edge before Surface Choose this function if the edge is applied and modified first, and the surface coating is applied afterwards. That is to say, the edges are applied to the part first and the profiles modified, and only then is the surface covered or veneered. |
| Machining |
Edge before CNC Choose this function if the edge has already been applied and is not to be modified by CNC. Edge on CNC Choose this function if the edge is to be modified and applied by CNC. Edge after CNC Choose this function if the edge is to be applied after CNC. |
| Contour | A predefined contour can be assigned to the edge via the button behind the entry or via the pull-down menu. The selected contour is automatically assigned to the corresponding part after loading. Observe the geometric location of the parts. |
| Color information | Text field that can also be output in the part list. |
Connection Situation:
| Connection | A predefined connector situation can be assigned to the edge via the button behind the entry Name. |
| Reverse direction |
If you have allocated a connection situation, the additional parameter Reverse direction can be assigned. Here you can change the direction for the evaluation of the Linear Division. e.g.: deactivated: 20mm:1:50mm activated: 50mm:1:20mm |
Bend Contour
Using bend contours, you can apply a contour to each part in X- or in Y- direction.
By clicking the button behind the entry you go to the outside contours level, where you can choose a contour. The dropdown box contains a list of contours recently used.
Bend direction
The bend contour can be applied in X and Y direction.
To determine the correct direction for attaching the desired contour to the part, imagine how the part would be positioned on the machining center. For a top shelf, for example, the depth aligns with the Y-direction and the visible edge aligns with the X-direction.