Drillings in part definitions

Access

Element Manager > Parts > Part Definition > Part Editor > Machining tab

Element Manager > Parts > Stretchable Purchased Parts > Part Editor > Machining tab

Options

Orientation

Defines the orientation of the drilling.

The drilling can have the following orientations:

  • TOP: vertical top
  • BOT vertical bottom
  • HXP horizontal (X positive)
  • HXN horizontal (X negative)
  • HYP horizontal (Y positive)
  • HYN horizontal (Y negative)
  • UNI Universal

For better visualization, the selected orientation scheme is displayed in the adjacent graphic for each chosen orientation. Only a universal operation can be rotated around three axes. The input fields are enabled once the UNI orientation is selected.

Orientation X

Rotation angle of the drilling in X-direction.

Depending on the selected orientation, the value is either predefined or can be freely chosen.

Orientation Y

Rotation angle of the drilling in Y-direction.

Depending on the selected orientation, the value is either predefined or can be freely chosen.

Orientation Z

Rotation angle of the drilling in Z-direction.

Depending on the selected orientation, the value is either predefined or can be freely chosen.

Linear Division

The position of the drilling can either be defined with fixed values for the start points in X, Y and Z or with a linear division.

If the checkbox 'Linear Division' is ticked, the X, Y and Z values can be defined using descriptors respectively.

Click the three-dot button to go to the Descriptors.

Starting Point X

X-coordinate of the insertion point.

Can also be defined by descriptors.

Start point Y

Y-coordinate of the insertion point.

Can also be defined by descriptors.

Start point Z

Z- coordinate of the insertion point The insertion point depends on the orientation.

Can also be defined by descriptors.

Countersink

Defines the type of countersink for the drilling.

It is possible to select between Step and Cone drilling .

It is possible to determine the depth and diameter of the countersink drilling for both types. Depending on the type of countersink drilling, either a step or conical countersink drilling is created.

Depth

Depth of the drilling in mm.

Can be defined as variable number.

Diameter

Diameter of the drilling in mm.

Can be defined as variable number.

keyword: step drilling