ICT Designer

Access

Ribbon : Main data > Main data > Element Manager > Parts > Stretchable Purchased Parts > Format: Current format > ICT Designer

Organizer > Tab Element Manager > Parts > Stretchable purchased parts > Format: Current Format > Edit geometry

General Information

Parametrizable 2D-Geometries can be applied user-friendly with ICT. For example, parts can be generated from the geometries and applied for stretchable purchased parts.

The advantage is that no mathematical formula has to be defined to describe a parameter module. Only simple constraints have to be formulated to meet the requirement. ICT searches independently for a geometrical solution for the constraints.

Options

Parameters

Parameters are similar to variables in imos .

By calling the context menu with a right click, a new parameter can be applied.

The parameter name and the parameter value can be defined.

Afterwards the parameter can be allocated to a constraint with the parameter name .

Visualizations

The display of a cross section, individual segments or points can be modified with the visualization in the left window.

For applying a new cross section, call the context menu with a right click and select the function new visualization there.

Different visualizations can be applied to display, for example, auxiliary construction objects but which should not be displayed when generating a SPP later.

Conditions

If a segment was drawn afterwards the he position of the lines and points can be defined to one another or also absolutely.

For this purpose click the respective segments or points in the drawing section of the dialog with the context menu (right click). Depending on which and how many elements have been marked, the available existing options for the definition of the conditions change. After a condition has been defined, it appears on the left side below the node conditions .

Polylines

Calling the context menu a new polyline, a new rectangular or new circle can be drawn.

They can be edit via the context menu.

Segments

Lists the drawn segments in the drawing.

If a segment is marked in the list it will also be marked in the drawing on the right side.

They can be edit via the context menu.

Points Lists the points of the drawn segments in the drawing. They can be edit via the context menu.

Refer for this also the Whitepaper .