Current Format- SPP
Access
Ribbon : Main data > Main data > Element Manager > Parts > Stretchable purchased parts > Current format
Organizer > Tab Element Manager > Parts > Stretchable Purchased Parts > Format: Current format
General Information
The following options are available if you set the format to Current Format in the settings of a Stretchable Purchased Part.
Options
Default settings
| Open in Part Editor | Opens the SPP in the Part Editor . |
| Import | An already applied and saved ICT file can be loaded. |
| Export | The defined ICT file here can be exported. |
| Open ICT Designer | ICT Designer opens via the button. |
| Format | If current format as format has been selected in the stretchable purchased parts and already one or several cross sections have been applied with the ICT Designer, then these are shown in the properties of the stretchable purchased parts. |
| Machining | Number of machining operations defined in the Part Editor. |
| Inner contour | Number of inner contour machining operations defined in the Part Editor. |
Cross-Section – Default settings
| Manufactured Part |
Defines the SPP as manufactured part. Materials and a surface can be additionally assigned to the usual settings for a manufactured SPP (in-house production). The complete sections part list info and calculation are hidden and not read out for this.
If a SPP is defined as a manufactured SPP, then all settings are displayed with the production information and not filtered like the other SPP. |
| Material |
Is only available when the option Inhouse production has been marked. You can define a material for Inhouse production part. Thereby materials can be exchanged via variables and accordingly visualized. |
| Surface |
Is only available when the option Inhouse production has been marked. Thereby surfaces can be exchanged via variables and accordingly visualized. |
| Color Principle |
This is only displayed if option manufactured part is not checkmarked. The color principles have an effect on the visual display as well as the final description. With a click on the button next to the entry you change into the level of the color principles. The dropdown box contains the last used principles. |
| Show from visualization level | Choose the corresponding visualization level from the Visu Manager. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Cross-Section – Commercial information
Is only displayed when the SPP has been defined as Inhouse production part.
| Order number | Enter the order number for the SPP, it will be evaluated in the BOM. |
| Article number | Enter the article number for the SPP, it will be evaluated in the BOM. |
| Supplier | Supplier respectively manufacturer of the SPP. |
| Material Category | You can assign a Material category to a SPP. |
| Price [$/m] | The entered value defines the cost of the SPP per square meter. This entry is multiplied with the calculation factor in the part list and is taken then. |
| Mark up Factor | Multiplier for calculating the material costs. This factor is multiplied with the costs and the result is the retail price for the SPP. The value 1.1 is the surcharge of 10%. |
| Weight [kg/m] | Entry on the weight of the stretchable purchased part per running meter. The actual weight results from the length-weight multiplied with the length. |
Cross-Section – Construction
| Oversize |
Is only displayed when the SPP has been defined as Inhouse production part. Oversize on both sides. With an oversize of 10 mm a complete surcharge of 20 mm is calculated. |
| Linear Division |
Linear Division can be used to break the contour into pieces between the start and end points. For example, a linear division of 1:50 mm discontinues the stretchable purchased part by 50 mm exactly in the middle. The linear division 20mm:1:20mm shortens the stretchable purchased part at the beginning and end by 20 mm. |
Cross-Section – Connectors
For assigning stretchable purchased parts to a new connection situation, click the grey cross next to connector .
Thereby a new row is appears in the grid with which a connection situation can be selected. For placing this connection exactly, click on the plus sign before the selected connection situation. Now the listed options appear below.
| Connection Situation | Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Linear Division | The linear division defines the number and position of the assigned connectors along the extruded stretchable purchased part. |
| Z Offset | The Z Offset shifts the connector in the Z axis. The offset is based on the reference point of the SPP. |
| Offset contour |
The connectors will be shifted in X-direction by the entered value. A positive value moves the connector to the left. A negative value moves the connector to the right. The offset is based on the reference point of the SPP. |
| Snap radius | The entered value defines the maximum distance of the snap radius. This means that imos searches for possible existing partner parts within the value and where appropriate, machining should be generated. |
| Rotation around Z-axis | The Z rotation rotates the connector around the Z axis. A positive value effects a rotation counterclockwise. A negative value effects a rotation clockwise. |
Cross-Section – Machinings
For adding a machining, click on the grey plus next to the entry each time so that a new grid can be inserted in which further definitions can be made.
The number next to the entries show how many machinings have already been allocated to each type.
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
| Drills | The number next to the entry shows how many drilling holes have already been allocated to the PD. A drilling can be added via the grey plus. The grid for the definition of the drilling will be opened. |
| Lineboring | The number next to the entry shows how many lineborings have already been allocated to the PD. A lineboring can be added via the grey plus. The grid for the definition of the lineboring will be opened. |
| Grooves | The number next to the entry shows how many grooves have already been allocated to the PD. A groove can be added via the grey plus. The grid for the definition of the groove will be opened. |
| Workgroups | The number next to the entry shows how many workgroups have already been allocated to the PD. A workgroup can be added via the grey plus. The grid for the definition of the workgroup will be opened. |
| Rectangular Pockets | The number next to the entry shows how many rectangular pockets have already been allocated to the PD. A Rectangular Pockets can be added via the grey plus. The grid for the definition of the Rectangular Pockets will be opened. |
| Circular Pockets | The number next to the entry shows how many rectangular pockets have already been allocated to the PD. A Circular Pockets can be added via the grey plus. The grid for the definition of the Circular Pockets will be opened. |
| Lock Pockets | The number next to the entry shows how many lock pockets have already been allocated to the PD. A Circular Pockets can be added via the grey plus. The grid for the definition of the Lock Pockets will be opened. |
| Cut faceplate | The number next to the entry shows how many faceplates have already been allocated to the PD. A Cut faceplates can be added via the grey plus. The grid for the definition of the Cut faceplates will be opened. |
Sample Dimensions
The sample dimensions are only a guide for the data system. The actual dimension depends on the cross-section geometry.