Constructive connector characteristics - Sliding- and Folding door types / Part types
General Information
The following list gives an overview of all possible values for the characteristic “sliding- and folding door type/part type” (SFTYP). This characteristic is read-out in folding doors, sliding doors, folding-sliding doors and tambour cabinets.
Part numbers and availability
| No. | Name | Sliding doors | Bi-fold doors | Bi-fold sliding doors |
|---|---|---|---|---|
|
0* |
Accessory* | Yes | Yes | Yes |
|
1 |
Outside runner / Glider | Yes | Yes | Yes |
|
2 |
Center runner | No | Yes | Yes |
|
3 |
Slide | Yes | Yes | Yes |
|
4 |
Outside hinge | No | No | No |
|
5 |
Center hinge | No | Yes | Yes |
|
6 |
Lock plate | No | Yes | Yes |
|
7 |
Guide bracket | No | Yes | Yes |
|
8 |
Activator for buffer | Yes | Yes | Yes |
|
9 |
Buffer | Yes | Yes | Yes |
|
10 |
Slats | No | No | No |
|
11 |
Handle strips | No | No | No |
|
12 |
90°-edges | No | No | No |
|
13 |
Shutter housing guide (spiral-guide) | No | No | No |
|
14 |
Winding mechanisms | No | No | No |
|
15 |
Winding mechanism rods | No | No | No |
|
16 |
Pilaster strip | No | No | No |
|
17 |
Top cover | No | No | No |
|
18 |
End caps | No | No | No |
|
19 |
Center stoppers | No | No | No |
|
20 |
Brakes | No | No | No |
|
21 |
Rope systems | No | No | No |
|
22 |
Extension for winding mechanism rods | No | No | No |
|
23 |
Caddy-Brake | No | No | No |
|
24 |
Slide connector | Yes | Yes | Yes |
*Even when no type has been assigned in the field, the program will evaluate the type as Accessory.
Fitting criteria for sliding doors
| No. | Name | Fitting criteria | |
|---|---|---|---|
| 0 | Accessory | Fitting conditions |
Is inserted at the zero point of the article - cannot be referenced. Even when no type has been assigned in the field, the program will evaluate the type as Accessory. |
| Zero point reference | |||
| 1 | Outside runner / Glider | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Height reference runner" Side: characteristic "Lateral reference runner" Depth: characteristic "Depth reference runner" |
||
| 3 | Slide | Fitting conditions |
"Sliding and folding door type/ Part type" Connector Set must contain a connector of the part type "Outside runner/ Glider" The characteristic "Insert slide" must be set to 1 in the Outside runner/ glider. |
| Zero point reference |
Height and depth: insertion point analogous to the corresponding Outside runner/ glider Side: characteristic "Reference for length of slide" |
||
| 8 | Activator for buffer | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: adopts characteristics of the part type 9 Side: characteristic "Connector position" Depth: characteristic "Depth reference runner" |
||
| 9 | Buffer | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Buffer height reference" and "Height reference runner" Side: characteristic "Connector position" Depth: characteristic "Depth reference runner" |
||
| 24 | Slide connector | Fitting conditions |
"Sliding and folding door type/ Part type" "Linear Division for the lateral distance" |
| Zero point reference |
Height and depth: insertion point analogous to the part type "Slide" Side: characteristic "Linear Division for lateral distance" |
||
Fitting criteria for bi-fold doors
| No. | Name | Bi-fold doors | |
|---|---|---|---|
| 0 | Accessory | Fitting conditions | Is inserted at the zero point of the article - cannot be referenced. |
| Zero point reference | |||
| 1 | Outside runner / Glider | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Height reference runner" Depth: characteristic "Depth reference runner" Side: characteristic "Door number" (3 left segment, 1 right segment) |
||
| 2 | Center runner | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Height reference runner" Depth: characteristic "Depth reference runner" Side: characteristic "Door number" (3 left segment, 1 right segment) |
||
| 3 | Slide | Fitting conditions |
"Sliding and folding door type/ Part type" Connector Set must contain a connector of the part type "Outside runner/ Glider" |
| Zero point reference |
Height and depth: insertion point analogous to the corresponding Outside runner/ glider Side: characteristic "Reference for length of slide" |
||
| 5 | Center hinge | Fitting conditions |
"Sliding and folding door type/ Part type" "Division center hinge" |
| Zero point reference |
Height: characteristic "Division center hinge" Depth: always the inside of the door wing Side: center gap of each segment; Workgroup number determines the target segment (1 left segment / 3 right segment) |
||
| 6 | Lock plate | Fitting conditions |
"Sliding and folding door type/ Part type" Group number |
| Zero point reference |
Height: always at the center Depth: always on the inside of the door wing Side: always on the outside edge of the door towards the carcass center; workgroup numbers determine the target door wing (1 right segment / 2 left segment) |
||
| 7 | Guide bracket | Fitting conditions |
"Sliding and folding door type/ Part type" Group number 1 or 2 |
| Zero point reference |
Height: always at the door's bottom edge Side: always at the center of a segment gap Depth: always the inside of the door |
||
| 8 | Activator for buffer | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: adopts characteristics of the part type 9 Side: depends on Door number Depth: characteristic "Depth reference runner" |
||
| 9 | Buffer | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Buffer height reference" and "Height reference runner" Side: depends on Door number Depth: characteristic "Depth reference runner" |
||
| 24 | Slide connector | Fitting conditions |
"Sliding and folding door type/ Part type" "Linear Division for the lateral distance" |
| Zero point reference |
Height and depth: insertion point analogous to the part type "Slide" Side: characteristic "Linear Division for the lateral distance" |
||
The effects on bi-fold and sliding doors
| No. | Name | Bi-fold sliding doors | |
|---|---|---|---|
| 0 | Accessory | Fitting conditions | Is inserted at the zero point of the article - cannot be referenced. |
| Zero point reference | |||
| 1 | Outside runner / Glider | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Height reference runner" Depth: characteristic "Depth reference runner" Side: characteristic "Lateral reference runner" + "Door number" (1 at the outer left, 2 at the center of a segment gap, 3 at the outer right) |
||
| 2 | Center runner | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Height reference runner" Depth: characteristic "Depth reference runner" Side: characteristic "Lateral reference runner" + "Door number" (1 at the outer left, 2 at the center of a segment gap, 3 at the outer right) |
||
| 3 | Slide | Fitting conditions |
"Sliding and folding door type/ Part type" Connector Set must contain a connector of the part type "Outside runner/ Glider" |
| Zero point reference |
Height and depth: insertion point analogous to the corresponding Outside runner/ glider Side: characteristic "Reference for length of slide" |
||
| 5 | Center hinge | Fitting conditions |
"Sliding and folding door type/ Part type" "Division center hinge" |
| Zero point reference |
Height: characteristic "Division center hinge" Depth: always the inside of the door wing Side: center gap of each segment; Workgroup number determines the target segment (1 left segments and, if available, center segment / 3 right segments) |
||
| 6 | Lock plate | Fitting conditions |
"Sliding and folding door type/ Part type" Group number |
| Zero point reference |
Height: always at the center Depth: always on the inside of the door wing Side: always on the outside edge of the door towards the segment gap; workgroup numbers determine the target door wing (1 left- including center segment gaps; on the edge of the left door wing / 2 left- including center segment gaps; on the edge of the right door wing / 3 right segment gaps; on the edge of the left door wing / 4 right segement gaps; on the edge of the right door wing) |
||
| 7 | Guide bracket | Fitting conditions |
"Sliding and folding door type/ Part type" Group number 1 or 2 |
| Zero point reference |
Height: always at the door's bottom edge Side: always at the center of a segment gap Depth: always the inside of the door |
||
| 8 | Activator for buffer | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: adopts characteristics of the part type 9 Side: depends on Door number Depth: characteristic "Depth reference runner" |
||
| 9 | Buffer | Fitting conditions |
"Sliding and folding door type/ Part type" "Working number" "Door number" |
| Zero point reference |
Height: characteristic "Buffer height reference" and "Height reference runner" Side: depends on Door number Depth: characteristic "Depth reference runner" |
||
| 24 | Slide connector | Fitting conditions |
"Sliding and folding door type/ Part type" "Linear Division for the lateral distance" |
| Zero point reference |
Height and depth: insertion point analogous to the part type "Slide" Side: characteristic "Linear Division for the lateral distance" |
||
This could also be interesting for you:
- Constructive connector characteristics for folding and sliding doors