Constructive connector characteristics - connectors
Access
Ribbon : Main data > Main data > Element Manager > Connections > Connector
General Information
The constructive connector characteristics describe certain features of the connector. For example, you can modify the position of the connector in the article.
For connectors you can distinguish between the following types for the constructive connector characteristics:
- CC_Connectors.html#transport_clip__Exzenterverbinder
- Transport clip
- Constructive connector characteristics - connectors
- Clamex
Options
Transport clip
A transport clip is used to attach the adjustable shelves to the construction shelves. It is only used for the transport of the article.
The transport clip is defined as a cam connector. As though the transport clip would connect the side with the construction shelf. With the difference that the clip only has one working, the working for the side panel. The working for the shelf is leaved out.
If the program generates the transport clips, all adjustable shelves will be counted and their thickness will be interpreted.
First the software attempt to attach all adjustable shelves to the lowest construction shelf. If this isn't possible (because of the maximal number of adjustable shelves for the clip), the remaining selves will be attached to the next construction self. and so on, till all adjustable shelves will be arranged. Additional transport clips will be deleted respectively won’t be created.
The adjustable shelves won't be moved in fact. The software only interprets their thickness to place the transport clip (inclusive working).
Attributes
Cam Connector
| Preview | Characteristic-Name | Values | Explanation |
|
Offset 1st Exzenter (EXZENTER_1) |
Number (editable) |
The workings of the cam connector are shifted to this value. (In Z-direction of the connector coordinate system) The characteristic is entered in the dowel. |
|
Offset 2nd Exzenter (EXZENTER_2) |
Number (editable) |
This characteristic is necessary for all dowels, which are fixed to two cam connectors, as double dowels and angle dowels. The workings of the second cam connector are shifted to this value. (Double dowels in the negative Z-direction of the connector coordinate system; angle dowels depending on the angle). The characteristic is entered in the dowel. |
|
Double dowel (MS_ZBDOPPELT) |
The dowel type is selected with the help of the characteristic. | ||
|
1 = Yes | It is a double dowel. | |
|
0 = No | It is not a double dowel. | |
|
Dowel adjustment (DUEBELVERSCHIEBUNG) |
Number (editable) |
The workings of the dowel are shifted to this value. (In the negative Y-direction of the connector coordinate system). The characteristic is entered in cam connector. |
|
Group number for mitre trim (MITRE_GROUPS) |
Group number |
When this characteristic is set, then the trim mitre only the specified groups (machining) are used. For other trims the specified groups are ignored. This characteristic is important in connection with the option to align machining on bisectrix. This option allows the machining of the mitre to be aligned. |
Transport clip
| Preview | Characteristic-Name | Values | Explanation |
|
Transport clip: Maximum count of adjustable shelves (FACHSICHERUNG) |
Integral number (editable) |
The value defines the maximum number of adjustable shelves for one transport clip. |
Cabinet suspension and Backpanel connector
| Preview | Characteristic-Name | Values | Explanation |
|
Reference point top shelf (BZP_OBEN) |
aussen = outside Innen = inside |
Reference point with the top shelf. Outside = Connector is shifted to the part thickness of the top shelf. Inside = The connector is not shifted. |
|
Reference point back panel (BZP_RW ) |
aussen = outside Innen = inside |
Reference point with the back panel. Outside = Connector is shifted to the part thickness of the back panel. Inside = The connector is not shifted. |
|
Reference point panel (BZP_SEITE) |
aussen = outside Innen = inside |
Reference point with the side panel. outside = Connector is shifted to the part thickness of the side panel. Inside = The connector is not shifted. |
|
Reference point bottom shelf (BZP_UNTEN) |
aussen = outside Innen = inside |
Reference point with the bottom shelf. Outside = Connector is shifted to the part thickness of the bottom shelf. Inside = The connector is not shifted. |
Clamex
| Preview | Characteristic-Name | Values | Explanation |
|
Linear Division for inset at part 1 (INSET_PART_1_LINDIV) |
Linear Division | Defines the shift of the connector in direction Z via a linear division. | |
| Reference for inset at part 1 |
Part 1 Diagonal for mitre trim |
Defines the reference point for the Linear Division for inset at part 1. |