Part Editor - Machining
Access
Element Manager > Construction Principles > Parts > Part Definition > Basic Settings > Part Category > Part Editor > Machining tab
General Information
In the Machining tab of the Part Editor, you can add and configure the following machinings:
- drill
- groove
- lineboring
- inner contour
- workgroup
- pockets
Machinings added are listed in the "Machining" tree structure.
Add a new machining
-
In the toolbar, click on a machining tool of your choice, for example "Rectangular pocket".
This opens the Properties dialog in the sidebar.
- Change the properties of the rectangular pocket according to your ideas in the Properties dialog in the sidebar.
-
Click Apply (check mark) to save the changes and close the Properties dialog.
The machining is created and listed in the Machining structure tree.
Tip: Learn more about the properties of machining types here.
Duplicate Machining
- In the tree, select the machining that you want to duplicate.
- In the toolbar, click on the machining tool that you used to create the selected machining, e.g., the 'Drilling' tool for a drilling machining. A duplicate with the same settings will be inserted under the selected machining in the tree.
- Select the duplicate to edit it.
Copy Machining to Another Part
- In the tree, select the machining that you want to copy to another part.
- Click on 'Copy' in the toolbar.
- Click 'Close' to return to the Element Manager.
- Select the Part Definition of the part where you want to insert the copied machining.
- Click on the 'Part Editor' button in the Part Definition. The Part Editor will open.
- Go to the 'Machining' tab.
- Click on 'Paste' in the toolbar. The copied machining will be inserted in the tree.
Modify an existing machining
-
Select the desired machining in the Machining structure tree.
In the sidebar, the properties of the machining are loaded.
-
Change the properties to your liking.
The changes are applied automatically.
Tip: Learn more about the properties of machining types here.
Delete a machining
- Select the desired machining in the Machining structure tree.
-
Click Delete on the toolbar.
Key words: MPE MBT