Free Construction - Standard part
Access
Ribbon : Part Designer > Free Construction > Standard Part
iXplorer > Select an element in the Elements palette > Properties palette > Index tab Methods > Free construction
General Information
Via the Standard part a part with four edges can be generated.
You can define the length, width and thickness for the part in CAD.
Procedure
When you have started the function invites you to define the starting point of the first edge. Insert the coordinates of the starting point in the command line or define the point directly in the drawing area.
After that define the endpoint of the first edge. The position of the start- and endpoint results the part length. After that you are invited to define the end point of the second edge. Insert the coordinates of the starting point in the command line or define the point directly in the drawing area.
Finally you can define the part thickness.
After you have defined the standard part a dialogue opens up. Inside this dialogue you can make some additional settings.
If an article is selected in the imos Manager during the generation of a part, the new part will be assigned to this article.
Options
| Part type | Choose one of the part types. The part type has an effect on the part position on the machine table and the edging. |
| Part Definition | Inside the combo box you can see the last part definitions. Via a cklick on the button behind the entry you can switch to the Element Manager where you can choose a part definition. |
| Core material |
By default the material from the defined Part Definition is used as the core material for the standard part. Besides, another core material can be defined separately here as well. When calculating the part thickness, the thickness of the core material with the coating from the Part Definition is added together. |
| Flip | If you choose Yes the part will be flipped. |
| Reference edge |
The base line defines the edge on the hinge of the machine table. With the help of the combo box you can define an edge as base line. |
| First edge | The edge number 1 has an effect on the edging depending on the part definition. |
| Length | The value results from the definition of the standard part in the drawing. It’s possible to change the length manually. |
| Width | The value results from the definition of the standard part in the drawing. It’s possible to change the width manually. |
| Part thickness |
The value results from the definition of the part thickness in the drawing. You can change the value subsequently.
It only make sense to change the value if a material is used that was set up independently by the thickness, i.e. solid wood. In this case it makes sense to set the value of the characteristic Keep Thickness to Yes . For the event of a subsequently change of the material, the entered part thickness that is used for the graphical illustration, is not replaced by the default thickness of the assigned material. The normal case is the use of a material that is independent on thickness, i.e. PB19. The "part thickness" should not be changed in this dialog and "Keep Thickness" should be set on "No". This ensures that the thickness of new assigned material is also graphical used after changing the material of the part. |
| Create Manufacturing Data | You can define if manufacturing information for this part shall be created. |
| Keep Part Thickness |
If you chose Yes , the value of the field Part Thickness will be used. Independent of the thickness of the used Part Definition.
It is important in the part list output that the thickness of the material from the part definition is output for the material, but which deviates from the thickness of the part. Select No so that the part thickness can be overwritten by the settings from the selected part definition |