Free Construction - Part from polyline
Access
Ribbon : Part Designer > Free Construction > Part from polyline
iXplorer > Select an element in the Elements palette > Properties palette > Index tab Methods > Free construction
General Information
The function creates one or more parts along a polyline. So you can create a bended part for example.
Procedure
After you have started the function invites you to pick a polyline. After that a dialog opens. In this dialog you can define the properties of the part.
If an article is selected in the imos Manager during the generation of a part, the new part will be assigned to this article.
Options
| Relative position | The setting defines if the polyline run trough the center of the part, or if it runs along the left or right side. |
| Dimension settings |
The function defines how the part dimensions shall be generated. You can choose from the following entries:
|
| Upper edge/ lower edge | The value for the upper/ lower edge depend on the world coordinates system. |
| Height | The value defines the height of the part. |
| Part type | Choose one of the part types. The part type has an effect on the part position on the machine table and the edging. |
| Part Definition | Inside the combo box you can see the last part definitions. Via a cklick on the button behind the entry you can switch to the Element Manager where you can choose a part definition. |
| Core material |
By default the material from the defined Part Definition is used as the core material for the part. Besides, another core material can be defined separately here as well. When calculating the part thickness, the thickness of the core material with the coating from the Part Definition is added together. |
| Exterior gap | The inserted value is removed from the part length. This means that the part isn’t generated along the whole length of the polyline. |
| Interior gap | This function only has an effect when the polyline has an angle and minimum two parts are generated. The value defines the distance between the parts. |
| Recess | The function moves the part by the value parallel to the polyline. |
| Part thickness |
The parameter is automatically filled with the thickness from the PD, respectively the selected core material. The thickness can also be changed subsequently.
It only make sense to change the value if a material is used that was set up independently by the thickness, i.e. solid wood. In this case it makes sense to set the value of the characteristic Keep Thickness to Yes . For the event of a subsequently change of the material, the entered part thickness that is used for the graphical illustration, is not replaced by the default thickness of the assigned material. The normal case is the use of a material that is independent on thickness, i.e. PB19. The "part thickness" should not be changed in this dialog and "Keep Thickness" should be set on "No". This ensures that the thickness of new assigned material is also graphical used after changing the material of the part. |
| Create Manufacturing Data | You can define if manufacturing information for this part shall be created. |
| Keep Part Thickness | If you chose Yes, the value of the field Part Thickness will be used. Independent of the thickness of the used Part Definition. |
| Rotate reference | This function affects the position of the part on the machine table. |