Modifier - part based Modifier
Access
iXplorer > Bauteil im Elementefenster markieren > Eigenschaften > Methoden
Options
General Information
| Connection Scan |
This function opens the dialog Connection Scan. The dialogue shows the connections of the actual selected elements. Thereby you can scan complete articles as well as individual parts. Refer also Connection Scan |
| Delete |
Deletes the element from the order. Always use this function to delete imos elements, if the 3D editing mode is not enabled. |
| Inherit Lineboring |
By double clicking the function in the method window, the requirement appears: pick side from where to inherit lineboring... . Select the panel side of which lineboring should be transferred. Afterwards a query window appears to modify the lineboring presetting. Move front lineboringforward/backward : Enter the value by which the front lineboring is to be moved in depth in relation to the default settings. up/down : Enter the value by which the front lineboring is to be moved in height compared to the lineboring in the side panel. Move back lineboringforward/backward : Enter the value by which the back lineboring is to be moved in depth in relation to the default settings. up/down : Enter the value by which the back lineboring is to be moved in height compared to the lineboring in the side panel. |
| Move/Rotate |
By clicking on the button you open the dialog Move/Rotate. With the support of the dialog you can move or rotate positioned elements in the drawing section. Refer also Move/Rotate |
| Mirror machining | Individual parts can be mirrored around their part axis after they are inserted into a drawing. Surfaces as well as machining is mirrored. |
| Define stock part |
With this function you can define selected parts as stock part. If a new stock part is applied, imos checks if the serial number has already been assigned or if the part has another number. |
| Connection Situation | With this function you can manually add a connection situation. After calling the function, the Element Manager will open where you can select a connection situation. |
| Extend Surface to Polyline |
You can bend a part along a polyline. Therefore it's necessary that the polyline is drawn on the level of the edge of the part. Refer also Extend Surface to Polyline . |
| Align to line |
Contoured parts can subsequently be aligned to a user defined axis. This function is interesting for users who want to generate machine code. Refer also Align to line . |
| Align part in 3D |
Contoured parts can subsequently be aligned to a user defined axis. This function is interesting for users who want to generate machine code. Refer also Align part in 3D . |
| Apply Connector |
Connector can be applied to one part without selecting a second part for the connection situation. Refer also Apply connector to part . |
Transfer AutoCAD Element...
With this function you can transfer AutoCAD-Elements in already existing imos parts. By doing this, it is important that the part and AutoCAD-Elements are on the same level. Align the BKS on the part before creating the AutoCAD-Element.
| ...as inner contour | Starts the function ...as inner contour . |
| Circle as pocket | Starts the function Circle as pocket . |
| Rectangle as Pocket | Starts the function Rectangle as pocket . |
| Circle as drilling | Starts the function Circle as drilling . |
Splitting principles
An inserted part may subsequently be split into several parts with this function. These functions are usually used for splitting a work surface.
Splitting a work surface also splits affected edges of the part.
| ...Along Edges |
This function enables you to pick an edge of a part from where the part is divided perpendicular. The position of the splitting parameter is defined with the support of the linear division. Refer also Cutting Principle- ...from point to point Note: The method is also available to iX PLAN users. However, their configuration options are limited because salespersons should not modify master data.
|
| ...with Selection of Cutting Line |
This function applies for parts with more than four edges and so which have a defined splitting edge. When this function is selected, you can choose one of the several splitting lines displayed. Select the desired splitting line. Refer also Cutting Principle- with polyline Note: The method is also available to iX PLAN users. However, their configuration options are limited because salespersons should not modify master data.
|
| ...from Point to Point |
Here the cutting line is defined by 2 points. Refer also Cutting Principle- ...from point to point |
| with polyline |
You need a polyline to use this function. After calling the function, you have to choose a polyline for splitting the part. Refer also Cutting Principle- with polyline |