Cutting Principle - with Selection of Cutting Line

Access

iX Elements> Details Tab > Select element on part level > Cutting Principle > with selection of cutting line

iX Elements> Details Tab > Select element on edge level > iX Properties > Methods Tab > Cutting Principle

General Information

This function applies for parts with more than four edges and so which have a defined splitting edge.

Note: The method is also available to iX PLAN users. However, their configuration options are limited because salespersons should not modify master data.

Procedure

When this function is selected, you can choose one of the several splitting lines displayed. Select the desired splitting line.

Use case: Work surfaces

Splitting cuts are suggested based on inside corners and cabinet joints. Mitre cuts are only suggested if the panels to be cut have identical depths.

Furthermore, suggestions for splitting cuts in depth are made. Suggested splitting cuts are parallel to the leading/ front edge (base edge of the panel).

The applicable depths are defined in the section Core Material of the Material principle . Depth cuts are offered, for example, on corner panels, room divider panels or "extra deep" worktops. In room divider situations (imos recognizes items that are placed back to back), a depth cut in the middle of the panel is also offered.

Another prerequisite for the use of depth cuts is that the panel is cut into a maximum of two panels by a depth cut.

In general, the selection of splitting cuts for worktops is reduced to realistic suggestions on the program side.

Different colors help to tell the types of cut suggestions apart:

  • Cut suggestions in length: Red
  • Cut suggestions at article/ cabinet joints: Green
  • Cut suggestions in depth: Blue

Options

Cutting principle

The splitting principle combines the splitting contour and the profile to one principle for the cutting edge.

With a click on the button the dialogue Cutting principle opens. In this dialogue you can choose from the existing principles or set up a new one.

Split contour

You will find the splitting contours as an outer contour in the Element Manager. By clicking on the button next to the entry you change into the Element Manager. to choose a contour. Selecting a splitting contour is pointless if the element is divided by a polyline.

Left / Right Profile

A profile can be allocated to the cutting edges independently from one another. By doing this, e.g. a milling profile with a groove can be allocated to the left cutting edge and a suitable counter profile to the right edge.

Tool compensation

With the support of this function you can move the outer radius of the splitting contour.

The entered value is given in mm and only affects the radius of the contour.

After splitting the panel, the set radius correction is processed. By having a created gap, the panels can be joined better while assembling.

Splitting Edges

Trim With this function you set the definition between the trim and the edges.
Edge and Surface

Surface, Edge Undefined:

You can select this function if the edge is processed in the Postforming process because there is no trim between the surface coating and edge.

Surface before Edge:

You can select this function if the surface coating has been applied first or a precoated material is used and then apply and process the edge.

Edge before Surface:

You can select this function if the edge has been applied and processed and then apply the surface coating which means that the edges are applied to the part first and afterwards the surface is coated or veneered.

Machining Sequence

With this function you can define if the edge should be considered first, after or on the machining center.

Edge before CNC:

You can select this function if the edge has already been applied and does not have to be processed on the BAZ anymore.

Edge on CNC

You can select this function if the edge should be processed on the BAZ.

Edge after CNC

You can select this function if the edge should be applied after the BAZ.