Align part in 3D

Access

imos Manager > Tab Details > Sele > ct elements on part level Align Part in 3D

iXplorer > Select corresponding element in the Elements palette > Properties palette > Methods > General

General Information

Contoured parts can subsequently be aligned to a user defined axis. This function is interesting for users who want to generate machine code.

Options

Grain angle This function can modify the grain angle of the part. You can select the angles 0°, 45°, 90° and 135°.
Draw reference line In the drawing screen you can freely draw a reference line. This line defines the new X-axis of the part.
Select reference line Definition of the new X-axis of the part. After the function is selected the mouse pointer changes to a pick box and the newly drawn line can be selected.
Select origin Definition of the new origin of the part.
Reference edge

With this function you can define the base edge for the part. By clicking once on the button, the drawing section appears where you are required to pick an edge.

The edge, which is defined as the base edge, is positioned on the machine stopper.

Move in X-direction Move the contour part opposite the zero point in X-direction.
Move in Y-direction Move the contour part relative to the origin in Y- direction.
Rotation Angle Rotation of the contour part around the Z-axis. Right is the positive rotation direction.
First edge You can select a part edge for edge 1 from the dropdown box. Proceeding from edge 1 the remaining edges are numbered in ascending order counter-clockwise.