Cutting Principle - from Point to Point

Access

imos Manager > Tab Details > Select element on part level > Cutting Principle > from point to point

iXplorer > > Select corresponding edge > Properties palette > In dex tab Methods Cutting Principle

General Information

This function enables you to split a part from point to point.

Procedure

After calling the function a new dialog will be opened, where you can define the splitting parameters.

After defining the splitting line a new dialogue will be opened, where you can define the splitting parameters.

Options

Cutting principle

The splitting principle combines the splitting contour and the profile to one principle for the cutting edge.

With a click on the button the dialogue Cutting principle opens. In this dialogue you can choose from the existing principles or set up a new one.

Split contour

You will find the splitting contours as an outer contour in the Element Manager. By clicking on the button next to the entry you change into the Element Manager. to choose a contour. Selecting a splitting contour is pointless if the element is divided by a polyline.

Left / Right Profile

A profile can be allocated to the cutting edges independently from one another. By doing this, e.g. a milling profile with a groove can be allocated to the left cutting edge and a suitable counter profile to the right edge.

Change Part Orientation If the function is activated, the parts are realigned after splitting. For example, this makes sense for splitting an L-shaped working surface.
Tool compensation

With the support of this function you can move the outer radius of the splitting contour.

The entered value is given in mm and only affects the radius of the contour.

After splitting the panel, the set radius correction is processed. By having a created gap, the panels can be joined better while assembling.

Splitting Edges

Trim With this function you set the definition between the trim and the edges.
Edge and Surface

Surface, Edge Undefined:

You can select this function if the edge is processed in the Postforming process because there is no trim between the surface coating and edge.

Surface before Edge:

You can select this function if the surface coating has been applied first or a precoated material is used and then apply and process the edge.

Edge before Surface:

You can select this function if the edge has been applied and processed and then apply the surface coating which means that the edges are applied to the part first and afterwards the surface is coated or veneered.

Machining Sequence

With this function you can define if the edge should be considered first, after or on the machining center.

Edge before CNC:

You can select this function if the edge has already been applied and does not have to be processed on the BAZ anymore.

Edge on CNC

You can select this function if the edge should be processed on the BAZ.

Edge after CNC

You can select this function if the edge should be applied after the BAZ.