Transfer AutoCAD Element-...as inner contour

Access

imos Manager > Tab Details > Select elements on part level > Transfer AutoCAD-Elemente > ...as inner contour

iXplorer > > select corresponding element > Properties palette > Methods Transfer AutoCAD-Elements

General Information

If an AutoCAD-Element is transferred as an inner contour, you must ensure that the AutoCAD-Element is on the same level as the part.

Take care that the element is drawn counterclockwise.

Procedure

By double clicking on the function, a request will appear to pick an AutoCAD-Element. After selecting the marked element, a new dialogue will appear for the exact definition of the cut.

Options

Settings The cutout can be defined either as continuous, or you can enter a fixed depth for it. If the option onset is selected, the entered depth has no effect.
Fixed Depth The entered value defines the depth of the inner contour.
Clean out

When checked, the contour will be cleared out like a pocket – regardless of whether 'Fixed Depth' or 'Through' is selected.

Tool compensation

If the polyline of the elements was drawn counterclockwise, it means

Left - that the contour is carried out laterally to the inside of the contour routing.

Right - that the contour is carried out laterally to the outside of the contour routing.

Centre - that the contour is exactly carried out on the contour routing.

Profile name A profile can also be assigned to the cutout along the contour. All profiles in the Element Manager are listed here.
Tool Rotation Define the direction of rotation of the tool to generate the cut.
Face of part Determines whether the cutout is to be made from above or from below.

Record modifier

These functions are associated with Modify Stack, and are only effective if the modified article was mapped using Stack and was then reconstructed with different measurements.

Location of the Cutout

Speed input

The distance of the contour to the reference point remains the same after modifying the dimension of the part in X- and Y- direction.

Relative in X and Y direction

The distance of the contour to the reference point is relatively maximized or minimized. This means that the relationship between overall length X1 and distance A1 remains the same as that between overall length X2 and distance A2.

Relative in X direction

The distance between the contour and the reference point is increased or reduced relatively in X direction after changes to the measurements of the part.

Relative in Y direction

The distance between the contour and the reference point is increased or reduced relatively in X direction after changes to the measurements of the part.

Select reference point...

Definition of the reference point of the inner contour on the part.

After selection, the mouse switches to Snap, and the desired point may be clicked in the drawing. This must be a point that is on the part to which the drilling is being applied.