Single parts -Filler/ Valance
Access
Ribbon : Main data > Main data > Element Manager > Construction Principle > Single Parts
Organizer > Tab Element Manager > Construction principles > Single parts
Options
Default settings
| Part Definition | Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last. |
| Part thickness | Shows the Z dimension of the current Part Definition. |
| Description text | Editable text field. The inserted text only acts as a description of the construction principle. |
| Part Info | Editable text field. The inserted text can be displayed in the part lists. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Construction
| Direction for Filler Construction |
With the help of this option you can define the construction side of the filler related to the reference part. You can choose from the following entries: Left/Top The filler will be created on the left side (side panels) respectively on top (shelves) related to the reference part. Right/ Bottom The filler will be created on the right side (side panels) respectively on bottom (shelves) related to the reference part. Inside The filler will be created inside the corpus The filler is referred to the selected zone. Outside The filler will be created outside the corpus. The filler is referred to the selected zone. Center The filler will be created centered to the selected reference part. |
| Stop | The parameter defines the alignment of the filler. The filler can be attached to the front or back of the reference part. |
| Filler width | The entered value defines the width (the reference part is a side panel) respectively the height (reference part is a shelf) of the filler. |
| Offset right / top | The filler will be extended by the entered value. A filler that constructed at the side will be extended to the top. A filler that constructed at a shelf will be extended to the right. |
| Offset left / bottom | The filler will be extended by the entered value. A filler that constructed at the side will be extended to the bottom. A filler that constructed at a shelf will be extended to the left. |
| Offset at the side |
The value will be added to the width of the filler. This parameter only makes sense if you want to create the filler on the edge of the side panel. This is possible if the construction direction right/bottom or left/top and no inset is set. Thereby, the depth of the side panel is shortened to the thickness of the filler. |
| Offset plus part thickness |
If this parameter is activated the thickness of the filler will be added to the inset. This parameter only makes sense if you want to create the filler on the edge of the side panel. This is possible if the construction direction right/bottom or left/top and no inset is set. Thereby, the depth of the side panel is shortened to the thickness of the filler. |
| Recess |
The entered value defines the distance between the reference edge of the reference part and the filler. The Filler is shifted by this value. This parameter is not valid if the Design Parameter is activated. |
| Offset plus part thickness | If this parameter is activated the thickness of the filler will be analyzed and added to the backset. |
Connector
|
Only one connection situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Links top/ right bottom |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Right top/ left bottom |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
Manufacturing information
| Information Set | Via a click on the button behind the entry you will switch to the level of the information sets. The dropdown box lists the last used information sets. |