Drawer
Access
Ribbon : Main data > Main data > Element Manager > Construction Principle > Single Parts
Organizer > Tab Element Manager > Construction principles > Single parts
General Information
There are 3 different construction types for drawers:
- Drawer system
- Purchase drawer
- Manufactured Part
The number of available options depend on the chosen construction type.
Default settings
| Construction type |
You can choose from the following types:
|
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Settings for Drawer Systems:
Construction
| Distance to front panel bottom | Defines the minimum distance from the bottom edge of the drawer to the bottom edge of the front panel. |
| Distance to front panel top | Defines the minimum distance from the top edge of the drawer to the top edge of the front panel. |
| Top shelf allowance | Only with an enabled function, it will be searched for the top shelf and minimum distance can be defined to it. |
| Distance to Top shelf | Defines the minimum distance from the top edge of the drawer to the bottom edge of the top shelf. |
| Bottom shelf allowance | Only with an enabled function, it will be searched for the bottom shelf and minimum distance can be defined to it. |
| Distance to bottom shelf | Defines the minimum distance from the bottom edge of the drawer to the top edge of the bottom shelf. |
| Inner drawer positioning |
The drawer is positioned on the bottom by default. For a positioning from the top, the drawer will be placed as far as possible up. The settings "Distance to front panel top" and "Distance to Top Shelf" define the offset downwards. The following options of construction are supported for positioning from top:
|
| depth reference |
The depth reference has an effect on the position of the slider. You can choose if the slider shall be assigned to the short or long side panel of the article. |
Front
| Insert Front |
Define whether to use a filler for the drawer. A panel will be inserted if the function is active. |
| Part Definition filler |
Is only activated if a filler is inserted. Defines the Part Definition of the filler. |
| Thickness |
Is only activated if a filler is inserted. If no value is entered, the dimensions of the used Part Definitions will be used. |
| Connect with neighbour element | Via this function you can join the drawer front with the article front (apothecary cabinet). |
| Adjust distance |
The function is only activated when the function " Connect with neighbour element" is activated with a check mark. |
| Handles/ knobs | You can assign up to 3 pull principles/ lock principles to a drawer. |
| Manufacturing Information | The panel may be assigned its own principle in the manufacturing information. |
Front edge / Back edge / Shelve
The following settings can be defined for the front panel, the back panel and the bottom of drawer systems:
| Part Definition | Defines the Part Definition of the part. |
| Thickness |
Is only activated if a part is inserted. If no value is entered, the dimensions of the used Part Definitions will be used. |
| Manufacturing Information |
Is only activated if a part is inserted. A Manufacturing Information can be assigned to the part. |
Connections
| Connection Situation | Defines the connection of the drawer system. |
Settings for Purchased Drawers:
Construction
| Distance to front panel bottom | Defines the minimum distance from the bottom edge of the drawer to the bottom edge of the front panel. |
| Distance to front panel top | Defines the minimum distance from the top edge of the drawer to the top edge of the front panel. |
| Top shelf allowance | Only with an enabled function, it will be searched for the top shelf and minimum distance can be defined to it. |
| Distance to Top shelf | Defines the minimum distance from the top edge of the drawer to the bottom edge of the top shelf. |
| Bottom shelf allowance | Only with an enabled function, it will be searched for the bottom shelf and minimum distance can be defined to it. |
| Distance to bottom shelf | Defines the minimum distance from the bottom edge of the drawer to the top edge of the bottom shelf. |
| Inner drawer positioning |
The drawer is positioned on the bottom by default. For a positioning from the top, the drawer will be placed as far as possible up. The settings "Distance to front panel top" and "Distance to Top Shelf" define the offset downwards. The following options of construction are supported for positioning from top:
|
| depth reference |
The depth reference has an effect on the position of the slider. You can choose if the slider shall be assigned to the short or long side panel of the article. |
| Drawer slide |
This function is only available for the construction type Purchase drawer. You can define if the slider shall be placed at the left/ right side or at the top/ bottom shelf. |
| Slide Insertion Reference |
Depending on the selection (bottom, middle, top), this determines the insertion point of the virtual runner and interior box. With the checkbox below you can define which of the two elements is applied as a reference and which is moved. |
| Allow Slide to Move | The option takes effect only when the drawers' Type of Construction is set to "Lineboring oriented" in the Article Designer. Activate it if you still wish for an optimized use of space in combination with "Lineboring oriented": the inner drawer becomes a fixed reference while the slider is moved as far up or down on the Z-axis as possible to optimize the use of space. |
| Offset | The function defines an additional offset of the drawer or the slide. |
| Movement in X |
Distance between the base point of the virtual interior box and the insertion point of the interior box in X direction for the selection Fix runner . Or the distance between the base point of the virtual runner and the insertion point of the runner in X direction for the selection Fix box . |
| Distance in Z |
Distance between the base point of the virtual interior box and the insertion point of the interior box in Z direction for the selection Fix runner . Or the distance between the base point of the virtual runner and the insertion point of the runner in Z direction for the selection Fix box . |
Front
| Insert Front |
Define whether to use a filler for the drawer. A panel will be inserted if the function is active. |
| Part Definition filler |
Is only activated if a filler is inserted. Defines the Part Definition of the filler. |
| Thickness |
Is only activated if a filler is inserted. If no value is entered, the dimensions of the used Part Definitions will be used. |
| Connect with neighbour element | Via this function you can join the drawer front with the article front (apothecary cabinet). |
| Adjust distance |
The function is only activated when the function " Connect with neighbour element" is activated with a check mark. |
| Handles/ knobs | You can assign up to 3 pull principles/ lock principles to a drawer. |
| Manufacturing Information | The panel may be assigned its own principle in the manufacturing information. |
Connections
| Connection Situation | Defines the connection of the purchase drawer. |
Settings for Inhouse Production:
Construction
| Distance to front panel bottom | Defines the minimum distance from the bottom edge of the drawer to the bottom edge of the front panel. |
| Distance to front panel top | Defines the minimum distance from the top edge of the drawer to the top edge of the front panel. |
| Top shelf allowance | Only with an enabled function, it will be searched for the top shelf and minimum distance can be defined to it. |
| Distance to Top shelf | Defines the minimum distance from the top edge of the drawer to the bottom edge of the top shelf. |
| Bottom shelf allowance | Only with an enabled function, it will be searched for the bottom shelf and minimum distance can be defined to it. |
| Distance to bottom shelf | Defines the minimum distance from the bottom edge of the drawer to the top edge of the bottom shelf. |
| Inner drawer positioning |
The drawer is positioned on the bottom by default. For a positioning from the top, the drawer will be placed as far as possible up. The settings "Distance to front panel top" and "Distance to Top Shelf" define the offset downwards. The following options of construction are supported for positioning from top:
|
| depth reference |
The depth reference has an effect on the position of the slider. You can choose if the slider shall be assigned to the short or long side panel of the article. |
| Slide Insertion Reference |
Depending on the selection (bottom, middle, top), this determines the insertion point of the virtual runner and interior box. With the checkbox below you can define which of the two elements is applied as a reference and which is moved. |
| Allow Slide to Move | By activating the option allow slide to move , the inside box is set as fixed reference and the slide is moved accordingly. |
| Offset | The function defines an additional offset of the drawer or the slide. |
| Movement in X |
Distance between the base point of the virtual interior box and the insertion point of the interior box in X direction for the selection Fix runner . Or the distance between the base point of the virtual runner and the insertion point of the runner in X direction for the selection Fix box . |
| Distance in Z |
Distance between the base point of the virtual interior box and the insertion point of the interior box in Z direction for the selection Fix runner . Or the distance between the base point of the virtual runner and the insertion point of the runner in Z direction for the selection Fix box . |
| Drawer height / Drawer depth |
Fixed Drawer Height Fixed value for the drawer height These dimensions are used in any case for the construction. Different Drawer Height Different values for the drawer height can be defined. |
| Drawer height / Drawer depth fix | These dimensions are used in any case for the construction. |
| Different Drawer height / Drawer depth |
To enter a new value, enter the value in the field and confirm with Enter. The entered value is available in the pulldown menu. A value set consists of some single values. The value sets function as follows: If the drawer is inserted into an article, the distance between the drawer filler and back panel will be determined as well as the available space for the drawer height. These values are compared to the created value sets and the next smaller value is chosen. |
| Profile | The activated function defines the inhouse production drawer as a purchased part. This has mainly an effect on the bills of material/ article list. Besides a purchased part isn't transferred to the machine. |
| Manufacturing information |
This option only is enabled after enabling the option "Purchase Part". Afterwards you can define an info set for the Purchase Part. |
Front
| Insert Front |
Define whether to use a filler for the drawer. A panel will be inserted if the function is active. |
| Part Definition filler |
Is only activated if a filler is inserted. Defines the Part Definition of the filler. |
| Thickness |
Is only activated if a filler is inserted. If no value is entered, the dimensions of the used Part Definitions will be used. |
| Connect with neighbour element | Via this function you can join the drawer front with the article front (apothecary cabinet). |
| Adjust distance |
The function is only activated when the function " Connect with neighbour element" is activated with a check mark. |
| Handles/ knobs | You can assign up to 3 pull principles/ lock principles to a drawer. |
| Manufacturing Information | The panel may be assigned its own principle in the manufacturing information. |
Soil
| Part Definition | Defines the Part Definition of the shelf. |
| Thickness |
Is only activated if a part is inserted. If no value is entered, the dimensions of the used Part Definitions will be used. |
| Manufacturing Information |
Is only activated if a part is inserted. A Manufacturing Information can be assigned to the part. |
Sides
| Drawer side | Enable the checkbox to generate the part. After that you can switch to the Element Manager to select a principle. |
| Manufacturing information | Manufacturing information for each part |
| Connection with Previous Part |
Defines the connection to the previous part. Remember that the construction direction runs counter-clockwise! |
| Connection with Next Part |
Defines the connection to the next part. Remember that the construction direction runs counter-clockwise! |
| Connection with shelf | Defines the connection to the shelf. |
| Joint previous |
The function defines the joint of the selected part to the previous part. Remember that the construction in imos runs counter-clockwise. Long The selected part continues through and butt joins with the previous or following part. With a diagonal previous or following part, the selected part automatically adjusts to the angle. Short The previous or following part continues through and butt joins with the selected part. Mitre The selected part joins with the previous or following part in a mitre. Perpendicular When using this function, the selected part is not adjusted, and the joining edge is generated with a 90° edge. Variables A variable number can be used for the definition of the trim. 1 = long 2 = short 3= mitre 4= rectangular |
| Joint next |
The function defines the joint of the selected part to the next part. Remember that the construction in imos runs counter-clockwise. Long The selected part continues through and butt joins with the previous or following part. With a diagonal previous or following part, the selected part automatically adjusts to the angle. Short The previous or following part continues through and butt joins with the selected part. Mitre The selected part joins with the previous or following part in a mitre. Perpendicular When using this function, the selected part is not adjusted, and the joining edge is generated with a 90° edge. Variables A variable number can be used for the definition of the trim. 1 = long 2 = short 3= mitre 4= perpendicular |
| Joint base | The function defines the joint of the selected part to the drawer base. |
| Over size top | A positive value creates an oversize upwards of the selected element. A negative value creates a reduction. The settings are all immediately displayed in the preview window. |
| Over size bottom | A positive value creates an oversize downwards of the selected element. A negative value creates a reduction. The settings are all immediately displayed in the preview window. |
| Over size previous | A positive value creates an oversize from the selected element to the previous part. A negative value creates a reduction. The settings are all immediately displayed in the preview window. |
| Over size next | A positive value creates an oversize from the selected element to the next part. A negative value creates a reduction. The settings are all immediately displayed in the preview window. |
| Reveal offset |
By entering a positive value in the field reveal, the part is revealed in the direction to the center of the drawer. With a negative value the reveal is in the opposite direction, so outside. |
| Reveal to shelf | The function creates an overlap of the base with the selected side. The shelf is grooved in the side panel with the entered value. |
| Part generation first edge | When generating a bottom shelf, the profile on edge 1 of the part definition is generated on this element. |
| Part generation reference edge | When generating CNC programs the base edge on this element is aligned to axis X of the machine. |
Connections
| Connection Situation | Defines the connection of the purchase drawer. |