Single parts - Back panel
Access
Ribbon : Main data > Main data > Element Manager > Construction Principle > Single Parts
Organizer > Tab Element Manager > Construction principles > Single parts
Options
Default settings
| Part Definition | Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last. |
| Part thickness | Shows the Z dimension of the current Part Definition. |
| Description text | Editable text field. The inserted text only acts as a description of the construction principle. |
| Part Info | Editable text field. The inserted text can be displayed in the part lists. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Construction
| Reference parts |
With the help of this function you can define the alignment of the back panel. Left and Right Sides Default value. The back panel will be aligned to both side panels. If different inset dimensions of the groove for the right side panel and the left side panel have been selected or the side panel has different depths, then the back is inserted sloped between the side panels. Top/ Bottom Shelf The back panel will be aligned to the top- and bottom shelf. If different inset dimensions of the groove for the top shelf and bottom shelf have been selected or the top- and bottom shelf have different depths, then the back is inserted sloped between the top- and bottom shelf. Perpendicular to Left The back panel will be aligned perpendicularly to left side panel. The functions of the perpendicular construction become interesting if the side panels have different depths. If no perpendicular construction is selected in this case, the back is constructed sloped between the side panels. Perpendicular to Right The back panel will be aligned perpendicularly to the right side panel. Perpendicular to Bottom The back panel will be aligned perpendicularly to the bottom shelf. The functions of the perpendicular construction become interesting if the opposite shelves have different depths. If no perpendicular construction is selected in this case, the back is constructed sloped between the shelves panels. Perpendicular to Top The back panel will be aligned perpendicularly to the top shelf. |
| Construction type |
Generally there are two different construction types for a back panel. Saw groove A rabbet is milled in the adjoining parts. The groove width orientates itself to the back thickness and the selected oversize for the groove width in the technology data. If the back has to be milled, then a milling cutter for this diameter must be available for the calculated groove width. Mill groove A rabbet is milled in the adjoining part. This rabbet is always displayed and dimensioned as a groove in imos under the function edit part. However, a rabbet is created in NC-programs as shown. |
| Recess | You can select if the inset has to be dimensioned from the side panel to the back or to the front side of the back. |
| Inset of | The entered value defines the offset to back from the corpus. |
Groove / Rabbet
| Depth top/ bottom/ left/ right |
The value defines the depth of the groove or rather rabbet. You can enter in the corresponding fields for right, left, top and bottom the dimensions in mm. If the rebate depth equals the thickness of the side panels or the top-/bottom shelf, the back is butt to these parts. |
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
| Disabled for top shelf / bottom shelf / side panel left and right |
If the function is activated, machining from the grooves won't be transferred. You can choose between side panel left, side panel right, top shelf and bottom shelf. |
Connector
|
Only one connection situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Links |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Right |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Below |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Top |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |