Single parts - Door
Access
Ribbon : Main data > Main data > Element Manager > Construction Principle > Single Parts
Organizer > Tab Element Manager > Construction principles > Single parts
Options
Default settings
| Construction as |
The construction principle can be created as Single Door , Double Door or as Flipper Door . With the entry Door the hinges will be always set between door and side panel. If the option Double door is selected, the parameter for the part definition, the connector and the pulls are respectively displayed for the left and right door. The hinges can be set optionally between door and shelf or between door and side when executing as Flipper Door . (The definition to this is shown next to the entry connector.) |
| Part Definition |
Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last.
Different Part Definitions can be defined for double doors on the left and right side. |
| Part thickness | Shows the Z dimension of the current Part Definition. |
| Description text | Editable text field. The inserted text only acts as a description of the construction principle. |
| Part Info | Editable text field. The inserted text can be displayed in the part lists. |
| Separate info principle for left/right door | If necessary, with double doors info-records can be defined for the right and left door. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Construction:
Single door / Double door
The following settings are available for a construction asSingle Door or Flipper Door:
| Construction |
Define the construction type of the door.
|
| Filler |
Defines the door as filler. If the function is activated, the result is as follows:
|
| Hinged/Attached to |
If the door is defined as filler, the setting is not available. For single doors you can choose between left and right . For flipper doors you can choose between top and bottom . |
| Perpendicular |
This parameter only has an effect on a construction with different side panels or not rectangular articles. Activated function enables further parameters. |
| Perpendicular to |
Settings is only displayed for activated function Perpendicular . Hinged side / Lock sideIf the side panels do not run parallel to each other, you can define if the door has to be constructed perpendicular to the stop side or perpendicular to the lock side. |
| Position to |
Settings is only displayed for activated function Perpendicular . Position to hinged side/ Position to lock sideIf the side panels have different depths, you can define if the door has to be constructed perpendicular to the stop side or perpendicular to the lock side. |
| Use design parameters/ Front definition |
If Use design parameters/ front definition is activated, the dimensions for the construction will be retrieved from the design parameters. Otherwise the Oversize can be defined in the settings. |
| Offset top / bottom |
The option is only available when Use design parameters/ Front definition is not activated. Individual reveal values can be defined for the outer door dimensions. |
| Offset Hinged side / Lock side |
The option is only available when Use design parameters/ Front definition is not activated. Individual reveal values can be defined for the outer door dimensions. |
| Recess |
The value defines the inset of the door into the corpus. A negative value moves the door out of the corpus. |
| Backset plus part thickness | If you activate this function will include the part thickness to the offset, automatically. |
| Groove construction |
With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
Double door
The following settings are available for a construction asDouble Door :
| Construction |
Define the construction type of the door. With the entry Onset the door will lie on the corpus. With the entry Inset the door is flush to the front of the corpus. The door will be created between the side panels and the shelves. |
| Reference for right angle |
This parameter only is available for double doors . |
| Perpendicular |
This parameter only has an effect on a construction with different side panels or not rectangular articles. Activated function enables further parameters. |
| Perpendicular to |
Settings is only displayed for activated function Perpendicular . Perpendicular to hinged side/ Perpendicular to lock sideIf the side panels do not run parallel to each other, you can define if the door has to be constructed perpendicular to the stop side or perpendicular to the lock side. |
| Position to |
Settings is only displayed for activated function Perpendicular . Position to hinged side/ Position to lock sideIf the side panels have different depths, you can define if the door has to be constructed perpendicular to the stop side or perpendicular to the lock side. |
| Use design parameters/ Front definition |
If Use design parameters/ front definition is activated, the design parameters assigned will be used for the construction. Otherwise the Oversize can be defined in the settings. |
| Offset top / bottom |
The option is only available when Use design parameters/ Front definition is not activated. Individual reveal values can be defined for the outer door dimensions. |
| Offset Hinged side / Lock side |
The option is only available when Use design parameters/ Front definition is not activated. Individual reveal values can be defined for the outer door dimensions. |
| Groove double door |
The option is only available when Use design parameters/ Front definition is not activated. |
| Arrangement |
The option is only available when Use design parameters/ Front definition is not activated. Defines whether the gap is placed in center of the two doors or if both doors always have the same width . |
| Offset left |
The value defines the inset of the door into the corpus. For double doors the inset for the left and the right door can be defined independently. A negative value moves the door out of the corpus. |
| Offset right | The inset for the right and the left door can be defined independently. A negative value moves the door out of the corpus. |
| Backset plus part thickness | If you activate this function will include the part thickness to the backset, automatically. |
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
Connectors:
Einzeltür
The following settings are available for a construction asSingle Door:
| Connection Situation | A connection situation can be defined for a Single Door. |
| Alternative Linear Division for buffers | A linear division for the buffer is defined. This linear division overrides the definition from the Connector Set for the buffer. |
Double door
The following settings are available for a construction asDouble Door :
|
Same Connection Situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Connection Situation |
If the function Only one Connection Situation for all edges is disabled , different Connection Situations can be selected for both doors. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used connection situations. |
| Alternative Linear Division for buffers | A linear division for the buffer is defined. This linear division overrides the definition from the Connector Set for the buffer. |
Flap
The following settings are available for a construction asFlipper Door :
|
Same Connection Situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Hinged side | Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Lock side | Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Left and right |
If the function is activated you can define the same connection situation for the right and left door. And a separate connection situation for the Hinged side and the Lock side . If the function is deactivated you can define separ ate c onnection situation for right and left . Also for the Hinged side and the Lock side . |
| Alternative Linear Division for buffers | A linear division for the buffer is defined. This linear division overrides the definition from the Connector Set for the buffer. |
Handle
| Pull 1-3 |
You can apply up to 3 pulls/locks to the construction principle of a door. With a double door up to three pulls/handles/locks can be assigned separately to the right and left door. |
Stop Strip
The function is only displayed for double doors .
| Part Definition | Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last. |
| Attached to | With the help of this option you can define if the stop strip is attached to the left or right door. |
| Insertion side | The parameter defines if the stop strip is generated at the inner or outer side of the door. |
| Width | The value defines the width of the stop strip. The length is defined by the height of the door. |
| Overlay | The value define the width of the overlay of door and stop strip. |
| Gap top | The entered value defines the distance from the upper edge of the door to the upper edge of the stop strip |
| Gap bottom | The entered value defines the distance of the lower edge of the door to the lower edge of the stop strip. |
| Offset | The Stop Strip will be moved in the door by the entered value. |
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |