Single parts - Adjustable shelf
Access
Ribbon : Main data > Main data > Element Manager > Construction Principle > Single Parts
Organizer > Tab Element Manager > Construction principles > Single parts
Options
Default settings
| Part Definition | Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last. |
| Part thickness | Shows the Z dimension of the current Part Definition. |
| Description text | Editable text field. The inserted text only acts as a description of the construction principle. |
| Part Info | Editable text field. The inserted text can be displayed in the part lists. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Construction
| Offset left | The inserted value creates a protrusion of the shelf to the left side. A negative value results an inset of the shelf. |
| Offset right | The inserted value creates a protrusion of the shelf to the right side. A negative value results an inset of the shelf. |
| Offset front | The inserted value creates a protrusion of the shelf to the front. A negative value results an inset of the shelf. |
| Offset back | The inserted value creates a protrusion of the shelf to the back. A negative value results an inset of the shelf. |
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
| Rotation around X-axis | Via this function you can rotate the adjustable shelf by the X-axis. This means you can incline the self to the front or to the back. The entered value is specified in degrees. |
| Rotation around Y-axis | Via this function you can rotate the adjustable shelf by the Y-axis. This means you can incline the shelf to the left or right side. The entered value is specified in degrees. |
| Orientation frontal edge |
Relative Base Position on both sides If this option has been selected, the shelf will not be inserted squarely between side panels of different depth, but the front edge will be aligned diagonally instead. The function depends on the dimensions of the zone. Relative Base Position orthogonal on any side If this option has been selected, you can align the front edge of the shelf to one side (short side or long side). |
| Front edge orientation at |
Is only activated if the orientation of the frontal edge is set to Relative Base Position orthogonal on any side . Defines whether the front edge of the shelf is flush with the short or long side. |
| Front edge orthogonal to |
Is only activated if the orientation of the frontal edge is set to Relative Base Position orthogonal on any side . The back edge of the shelf is at right-angled with the selected side. |
| Orientation back edge |
Relative Base Position on both sides
If this option has been selected, the shelf will not be inserted squarely between side panels of different depth, but the back will be aligned diagonally instead. The function depends on the dimensions of the zone. Relative Base Position orthogonal on any side If this option has been selected, you can align the back of the shelf to one side (short side or long side). |
| Back edge orientation at |
Is only activated if the orientation of the back edge is set to Relative Base Position orthogonal on any side . Defines whether the front edge of the shelf is flush with the short or long side. |
| Back edge orthogonal to |
Is only activated if the orientation of the back edge is set to Relative Base Position orthogonal on any side . The back edge of the shelf is at right-angled with the selected side. |
Connector
|
Only one connection situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Links |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Right |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |