Single parts - Bottom shelf
Access
Ribbon : Main data > Main data > Element Manager > Construction Principle > Single Parts
Organizer > Tab Element Manager > Construction principles > Single parts
Options
Default settings
| Construction as |
The construction principle can be created as shelf or as rail . If you choose the entry rail you will get other parameters to describe the principle. |
The following settings are available for a construction as Shelf :
| Part Definition | Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last. |
| Part thickness | Shows the Z dimension of the current Part Definition. |
| Description text | Editable text field. The inserted text only acts as a description of the construction principle. |
| Part Info | Editable text field. The inserted text can be displayed in the part lists. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
The following settings are available for a construction as Rail :
| Part definition front and back | Via a click on the button behind the entry you will switch to the level of Part Definitions. The dropdown box contains part definitions you used at last. |
| Part thickness | Shows the Z dimension of the current Part Definition. |
| Description text | Editable text field. The inserted text only acts as a description of the construction principle. |
| Part Info | Editable text field. The inserted text can be displayed in the part lists. |
| Manufacturing information | Via a click on the button behind the entry you will switch to the level of the Manufacturing Information . The dropdown box lists the last used information sets. |
Construction
The following settings are available for a construction as Shelf :
| Construction |
You can choose between the entries Inset, Onset and Mitre. The shelf inset will be constructed between the side panels. The shelf onset will be created below the side panels. If you choose the entry mitre the shelf will be created with a mitre joint. |
| Offset left | The inserted value creates a protrusion of the shelf to the left side. A negative value results an inset of the shelf. |
| Offset right | The inserted value creates a protrusion of the shelf to the right side. A negative value results an inset of the shelf. |
| Offset front | The inserted value creates a protrusion of the shelf to the front. A negative value results an inset of the shelf. |
| Offset back | The inserted value creates a protrusion of the shelf to the back. A negative value results an inset of the shelf. |
| Vertical Offset |
The entered value moves the bottom shelf opposite the bottom edge of the side panel. A negative value moves the shelf to the top into the corpus. A negative value moves the shelf downward. This function is only activated when it's an shelf inset. |
| Groove construction | With a click on the button next to the entry you change into the level of the groove constructions. The dropdown box contains the last used principles. |
| Orientation frontal edge |
Relative Base Position on both sides If this option has been selected, the shelf will not be inserted squarely between side panels of different depth, but the front edge will be aligned diagonally instead. The function depends on the dimensions of the zone. Relative Base Position orthogonal on any side If this option has been selected, you can align the front edge of the shelf to one side (short side or long side). |
| Front edge orientation at |
Is only activated if the orientation of the frontal edge is set to Relative Base Position orthogonal on any side . Defines whether the front edge of the shelf is flush with the short or long side. |
| Front edge orthogonal to |
Is only activated if the orientation of the frontal edge is set to Relative Base Position orthogonal on any side . The back edge of the shelf is at right-angled with the selected side. |
| Orientation back edge |
Relative Base Position on both sides
If this option has been selected, the shelf will not be inserted squarely between side panels of different depth, but the back will be aligned diagonally instead. The function depends on the dimensions of the zone. Relative Base Position orthogonal on any side If this option has been selected, you can align the back of the shelf to one side (short side or long side). |
| Back edge orientation at |
Is only activated if the orientation of the back edge is set to Relative Base Position orthogonal on any side . Defines whether the front edge of the shelf is flush with the short or long side. |
| Back edge orthogonal to |
Is only activated if the orientation of the back edge is set to Relative Base Position orthogonal on any side . The back edge of the shelf is at right-angled with the selected side. |
The following settings are available for a construction as Rail :
| Offset left | The inserted value creates a protrusion of the shelf to the left side. A negative value results an inset of the shelf. |
| Offset right | The inserted value creates a protrusion of the shelf to the right side. A negative value results an inset of the shelf. |
| Distance from front /back | The rail will be moved to the front and back by the inserted value. |
| Depth | The entered value defines the depth of the rail. If you have chosen a vertical cross bar the value will define the height of the cross bar. |
| Relative position | With the help of this parameter you can define if the cross bar is generated horizontal or vertical. |
| Vertical Offset |
The entered value moves the bottom shelf opposite the bottom edge of the side panel. A negative value moves the shelf to the top into the corpus. A negative value moves the shelf downward. This function is only activated when it's an shelf inset. |
Connector
The following settings are available for a construction as Shelf :
|
Only one connection situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Links |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Right |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
The following settings are available for a construction as Rail :
|
Only one connection situation for all edges |
If this function is activated the same connection situation will be used for all edges. If the function is deactivated you can a different connection situations to each edge. |
| Left front |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| right front |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| Left back |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |
| right behind |
Setting is only displayed when the function Only one Connection Situation for all edges is not enabled. Via a click on this function you will switch to the level of the connection situations. The dropdown box contains the last used principles. |