Group Parts
Access
Ribbon : Designer
Structure
The group Parts contains the following functions for creating and editing Part Designer .
| Contour part |
With the help of this function you can create a part to a edge of an existing part. The contour consist of a closed polyline. In the dialogue that opens, different settings (part type, PD etc.) can be made. If you press this button, the part will be generated. Refer also Contour part |
| Part to edge |
With the help of this function you can create parts along a polyline. In the dialogue that opens, different settings (part type, PD etc.) can be made. If you press this button, the part will be generated on the selected edge. Refer also Part to edge |
| Part from polyline |
With the help of this function you can create a part ou of an existing contour. In the dialogue that opens, different settings (part type, PD etc.) can be made. If you press this button, the parts will be generated on the selected extrusion path. Refer also Part from polyline |
| Part from points |
With the help of this function you can create a part out of points. In the dialogue that opens, different settings (part type, PD etc.) can be made. Via this function you can define the outline geometry of the part. If you press this button, the part will be generated on the basis of the basic points. Refer also Part from points |
| Standard Part |
With the help of this function you can create rectangular parts. For defining the part, you can define the start point and end point of the first edge, the endpoint of the second edge as well as the part thickness in the drawing. Afterwards a new dialog opens in the imos Manager, in which further parameters of the part such as part type, part definition and similar other things can be defined. Refer also Standard part . |
| Loft part |
Hyperparaboloidal parts, so-called loft-parts, can be generated with this function. Thereby a part is created with 2 bending lines which can be on different Z-levels. Refer also Loft-part . |
| Connection Situation |
With this function you can manually add a connection situation. Refer also Connection Situation via Free Construction |
| Free Drawers |
Now it is possible to insert a drawer in the drawing via the free construction without specially having to create an article for this. Refer also Drawer via Free Construction . |
| SPP to edge |
With the help of this function you can extrude a stretchable purchased part to the edge of a part. After you have started the function you will be invited to select an edge. Then a dialog opens, in which further settings for the stretchable purchased parts can be made. Refer also SPP to edge |
| Point-to-Point SPP |
With the help of this function you can create a stretchable purchased part along a path that is defined by points. After you have started the function you will be invited to select the section contour. Therefor select an existing polyline from the drawing or confirm with the enter key. Thereby the Element Manager will open and you can select a section geometry. After you have defined the section geometry you can span the edge point of the extrusion path. |
| SPP from polyline |
With the help of this function you can extrude a stretchable purchased part along a polyline. After you have started the function invites you to select a contour. Then a dialog opens, in which further settings for the stretchable purchased parts can be made. Refer also SPP from polyline |
| 3D Drafting |
Parts or whole articles can be stretched or moved with this function. Refer also 3D Drafting . |
Related topics:
Key words: Free Construction