Group Tools
Access
Ribbon : Designer
Structure
The group Tools contains the following functions.
| 3D workings on |
The function activates the 3D workings. Refer also Part Designer |
| 3D workings off | The function deactivates the 3D workings. |
| Assign profile | Via this function you can assign a profile to a part. After calling the function, you are requested to select a profile geometry or to push Enter and change into the Element Manager to choose a profile. After choosing a profile, you are requested to select an edge to assign the profile. |
| New profile |
With the help of this function you can generate a new profile from a polyline. After calling the function, you are requested to choose the profile contour (poyline). By selecting the side, you can determine if the selected polylines should be created as a positive or negative impression of the geometry. The new profile is saved in the basic data. Afterward you find the profile under the Profiles in the directory Automatically created in the Element Manager. |
| Intersection |
With this function imos parts can be edited by creating a cut set from the 3D solid and imos parts to reshape the imos parts. The prerequisite is, that there is one solid ans one part at least. And the elements have to interpenetrate. After you have started the function you will be invited to select the elements (solids and parts). The program automatically identifies which elements are imos parts and which are 3D solids and the cut set is generated from these. |
| Difference |
With the help of this function you can subtract a 3D solid from an imos part. The prerequisite is, that there is one solid ans one part at least. And the elements have to interpenetrate. After you have started the function you will be invited to select the elements (solids and parts). The program automatically identifies which elements are imos parts and which are 3D solids and the cut set is generated from these. |
| Union |
With the help of this function you can add a 3D imos solid to an imos part. The prerequisite is, that there is one solid ans one part at least. And the elements have to interpenetrate. After you have started the function you will be invited to select the elements (solids and parts). The program automatically identifies which elements are imos parts and which are 3D solids and the cut set is generated from these. |
| Quick exploded view |
The function can be used to display an article in an exploded view with a default factor of 35% (0.35). After you have started you will be invited to select the article you want to explode. You can’t define any settings. |
| Return from exploded view |
The function resets a generated exploded view. The function affects the automatic exploded view as well as the manual exploded view. |
| Apply explosion |
With this function you can create an exploded view manually. Refer also Exploded view |
| Show insertion point |
The function shows the insertion point of the selected part.
It can happen that you can’t see the insertion point. In this case check the settings for the insertion point. Refer also Define insertion point (below). |
| Definition of the Insertion Point |
The function opens a dialog where you can define the appearance of the insertion point. You can define the style and size of the point. Beside you can decide of the point size shall depend on the zoom factor or if you want to use a fixed size. |
| Delete insertion point | The insertion point will disappear in the drawing. |
| Part Dimensioning Quick |
With "Part Dimension Quick" you can dimension a part or label it and save it. After clicking on "Part Dimension Quick", the options for the Quick part dimensioning appear in the iX Properties palette. Here you can select the desired settings for the dimensioning or leave the settings unchanged. Part Dimensioning Quick uses the Dimensioning principles. imos always loads the most recently used settings at this point. While the iX Properties palette is displayed with the dimension settings, the Pick mode is active. As soon as you have picked a part, it is dimensioned with the set preferences. The view and the ribbon menu then switch to Quick part dimensioning mode. In this mode, the ribbon offers functions for manual dimensioning, manual labeling or for saving the drawing in a DWG. The Go back button takes you back to the previous view and you can continue working. The Quick part dimensioning supports both single parts and multi-parts. In the case of a multi-part, you are asked in a dialog whether the multi-part should be dimensioned as a whole or whether the picked child part should be dimensioned. |
| Dimensioning principles | Opens the dialogue Dimensioning principles . |
| Refresh all parts | The complete drawing is calculated again. All parts will be refreshed and the changes will be displayed. |
| Refresh multiple parts | The function refreshes just the selected parts. |
| Refresh blocks | With this function AutoCAD blocks can be refreshed and changes can be applied. |
| Define article |
The function unites several parts to an article. After you have started the function you are invited to select the parts that you want summarize. Afterwards you can define a name for the article. This article won't be listed in the Article Center. |
| Add article |
With this function you can add further parts to an already existing article. First choose the article and afterwards the parts that you want to add. |
| Explode article | The function breaks the article down. |
| Define planposition |
The function unites several articles to a planposition. After you have started the function you are invited to select the articles that you want summarize. Afterwards you can define a name for the planposition. |
| Add planposition |
Via this function you can add articles to an existing plan position. First select the plan position and after that pick the articles you want to apply. |
| Explode planposition | The function breaks the planposition down. |
| Show bounding box | In the connector characteristics of the connectors a bounding box can be defined that is shown in CAD. |
| Collision check | You can check the collision of connectors with other connectors or parts with the help of the collision control. |
| Core material check |
Counter-checks the part dimensions against the panel dimensions defined for the Core material. In this way, you can check whether one or more parts appear in a planning that have a length and width for which the core material stored in the master data is too small. Note: The check does not correspond to a "warehouse management". A successful check in imos iX therefore does not mean that the core material stored in the master data is actually available for production. Furthermore, no waste optimization is carried out during the check. See Check part dimensions against available panel dimensions . |
| Contour Wizard |
You can set up profile- and contour geometries in imos with the help of the Contour Wizard. A click on the button opens the Contour Wizard. |
| Return to construction | Returns to the imos order after editing a contour with the Contour Wizard. |
| Laser Measurement | Doublecheck the distances between articles and elements using the Laser. It snaps perpendicular to article sides and edges that are close to the mouse cursor which makes it more intuitive than the measurement command DIST. Additionally, you can lock/ unlock the laser alignment, reverse it or turn it sideways. |
| Modify Contour Start/End |
Choose the edge that should be the first edge of the polyline before you create the corresponding part or article. Select the polyline in the drawing area. Then, click on the edge that you want to be the first edge. After you select the polyline, you can also use "Reverse direction" in the command line. It determines whether the edge sequence/ numbering should go clockwise or counter-clockwise. Note: We recommend an edge numbering that goes counter-clockwise . |