New section
Access
Ribbon : Output > Section > New section
General Information
The function determines the section level of a part or an article.
Sections can be made for any type of view and shows the section's surface and all the parts that are behind the section level.
The new sections are based on AutoCAD-Section objects and use their characteristics. If articles are modified with sections, an information message appears to show that the sections must be refreshed. The same information message appears after the modification on Object Designer articles. imos correctly displays visible and not visible background lines in the section blocks.
Calling the function, the dialogue imos Section options appears.
Procedure
| Select objects | First select all object you want to cut. |
| View direction |
Choose the direction for the section. You can choose from Current, Side View, Elevation View, Plan View. Enter the initial letter of the option to select it. |
| 1st/2nd point on section level |
Define the section line with the help of the first and second point. Use the ortho mode to generate a straight line. |
| Select point on upper side of section |
You will be asked to give a point on the upper side of the section. This point indicates to which side the section will be folded. Simply define the point next to the section line via a mouse click. Make sure that you don’t pick the actual cutting line. The section is folded to the direction of the selected point. |
| Name of the section | Enter a name for the section before you position the section. Normally it’s A for the first section B for the second and so on. |
| Position section | Once the section has been generated, you will be asked to select the point where it shall be positioned. You can define the position with the mouse. |