iX Section options
Access
Ribbon : Drawing Views > 2D Drawing Views > New Section or Refresh View
Options
The following symbols and descriptions are available:
| Surface symbol |
The surface symbol represents the grain direction of the surface. By applying a surface with a grain direction, the arrow symbolizes the grain direction in the cut and an X symbolizes a cut through the end grain wood.
A symbol does not exist for a surface without a grain direction. |
| Surface name | By activating the function, the surface name in the cut is shown. |
| Material symbol |
The material symbol represents the grain direction of the material. By applying a material with a grain direction, the arrow symbolizes the grain direction in the cut and an X symbolizes a cut through the end grain wood.
A symbol does not exist for a material without a grain direction. |
| Material name | By activating the function, the material name in the cut is shown. |
| Hatch | A hatch will be generated in the section. |
| Background lines |
The background lines are lines that are behind the section level. Only the visible background lines are shown. |
| Article Contours |
With the aid of Article Contours it is possible to quickly create a planning overview that offers an overview of the position of the different articles in the order. The allocated layer of the Article Category is evaluated for that purpose. |
| Coloration | The selected view will be colored. |
| 2D Symbols |
2D symbols are displayed in the section. The 2D Symbols are customized configurable. For example, by displaying 2D symbols, it is possible to identify if the front panels belong to doors or drawers or the applied material can be shown symbolically. |
Object selection
If a new section is created, a dialog for applying a complete article or only single parts in the section can be defined via the object selection in the iX section options.