Move edge

Access

imos Manager > Index tab Details > Select an edge > Move Function > Move

iXplorer > > Select an edge > Properties palette > Index tab M ethods Move Functions

General Information

This function can move the selected edge to a defined value.

If one or more edges are highlighted in the upper element list the function is available.

Options

Connection Scan

If the option

  • Yes is chosen, then the existing connectors will be moved if necessary and adapted to the new situation.
  • No is chosen, then no connection scan is performed and existing connectors remain unchanged.
Offset

Here you can enter a value.

A positive edge offset moves into the part which means it is shortened.

A negative edge offset moves out of the part and therefore it is extended.

If a value is entered for the option dimension the entry field Offset is cleared.

Dimension

Alternatively, instead of an offset an absolute dimension can be defined for the part.

So that the field is displayed the following condition must be complied with:

  • The edge you want to move, as well the previous and next edge, is a simple straight edge.
  • Moving the edge changes the part dimension.
  • The part dimension that changes must be clearly determinable. (Either by moving the edge in width or depth of the part or that previous and next edge both run in direction of the part width and part depth.)

If a value is entered for the option offset the entry field dimension is cleared.