Machines*

Access

Ribbon : Main data > Main data > Element Manager > Workflow Center > Workflows

Organizer > Tab Element Manager > Workflow Center > Workflows

General Information

Configure settings for the type of machine, the producer of the machine or the WOP system as well as all machine dependent parameters.

The function of the machine class is to adapt the surface accordingly and control the right post processor.

The Reference of zero offset influences to which dimension the generated program refers.

It is possible to define Stops with stop positions and, if necessary, mirror options. In addition, min. and max. part dimensions can be defined here. In addition, with orientation and machining direction it is possible to define the different machining options via the stops. You can create a duplicate of a Machine Stop row via the sandwich menu - the duplicate row will be appended at the end of the table.

In the Positioning criteria it is possible to determine in which position the parts are to be clamped on the machine. Classic application use cases could be, for example, length of part side in X, grooves in X or concealed hinge bore at the limit stop.

Duplicate a Machine Stop

You can duplicate existing Machine Stops. You can then adapt the duplicates to a new use case with just a few clicks.

Procedure:

  1. In the Machine principle , open the drop-down Stops .
  2. In the Stop row to be duplicated, click on Sandwich menu>Duplicate .

    A copy of the Stop is created and appended as a new row at the end of the table. The initial Stop name is the table row number.

  3. Rename the duplicated Stop and make any changes in the Stop.
  4. Save the Machine principle.

Options

The description of each parameter can be found in the preview area. To do this, display the preview area on the side. As soon as you click in a parameter field, the corresponding description is loaded in the preview area. Exceptions to this are machine manufacturer-specific parameters. For this, refer to the documentation of the respective manufacturer.

Related Topics:

*) This function is optional and is not included in the basic version of imos .