Global settings*

Access

Ribbon : Start Tab/ Designer Tab > Element Manager > WorkflowCenter > Workflows

Organizer > Tab Element Manager > Workflow Center > Workflows

General Information

Universal settings that apply across machines and workflows are made in global settings.

These settings have an influence on the program generation and the data management.

The Global Settings node has the following subnodes:
  • Message type: Describes how CAM errors are logged, for example, whether an error cancels the process or only throws a warning. Contact the support team for more information.
  • Attributes: Lets you select attributes that the 'process data transfer' module shall evaluate. Contact the support team for more information.

Options

Part without CAM machining

Yes/ No

It determines whether empty parts should be included in the workflows. In the Conditions section of the Machining principle, you can filter by the attribute "Part without CAM machining"; The attribute is only evaluated as "true" when neither CAD nor CAM return a machining.

Note

We recommend this option to new customers only! In existing machine/ workflow setups, enabling "Part without CAM machining" could result in an extensive revision of the setup!

Note that when nesting is active, (Feature ID 28 or 87) nesting contours are always output as CAM machining. Gluing operations for edges or surfaces are types of CAM machining as well. The fact that machining might be filtered out by a CAM process is not part of the evaluation. Only the CAD output of the part is relevant.

Activate Group Processing/Machining

If active, workflows can be defined not only at part level, but also at article/group level.

Prerequisite: Module XML corpus data (article XML)

Automatic part rotation enabled Yes/ No
Remove double drillings No/ Remove all duplicate drillings/ Remove same diameter only
Suppress workflow directory No/ Save mode (no data loss)/ Always (data will be overwritten)
Connect drillings if there are drillings from both sides Yes/ No
Connect lineborings if there are drillings from both sides Yes/ No
Overlapping for drilling through splitting Type in the number of splitting points
Truncate machining on part surfaces If it is active, the calculation of the machining depth takes the thickness of coatings/ varnishes into account that are only applied to the part after CNC machining. This prevents too deep machining when painting is carried out later.

*) This function is optional and is not included in the basic version of imos .