Free Construction - SPP to edge

Access

Ribbon : Part Designer > Free Construction > SPP to edge

iXplorer > Select an element in the Elements palette > Properties palette > Index tab Methods > SPP Construction

General Information

With the help of this function you can extrude a stretchable purchased part to the edge of a part.

Procedure

After you have started the function you will be invited to select an edge. After that a new dialog with some settings opens.

If an article is selected in the imos Manager during the generation of a part, the new part will be assigned to this article.

Options

Face of part The function defines on which side the part is generated. Choose Bottom (right) or Top (left) out of the combo box.
Section contour

You can define the section contour for the SPP in two different ways.

Select an existing contour:

Choose a section contour out of the dropdown box or switch to the Element Manager by a click on the button with the three dots.

Select section contour:

After you have clicked on the button with the arrows your courser will turn to a pickbox. With the help of the pickbox you can select a polyline in the drawing.

Recess The parameter moves the SPP by the inserted value. The SPP is moved into the part, based on the selected edge.
Offset

The setting moves the SPP by the defined value. The SPP is moved away from the selected part.

There are two possibilities to define the value:

  • You can insert a value directly.
  • Via a click on the button you can switch to the drawing and pick a reference point that defines the value.
Protrusion front/ left

The value defines the protrusion of the SPP and thereby the length.

There are two possibilities to define the value:

  • You can insert a value directly.
  • Via a click on the button you can switch to the drawing and pick a reference point that defines the value.
Protrusion back/ right

The value defines the protrusion of the SPP and thereby the length.

There are two possibilities to define the value:

  • You can insert a value directly.
  • Via a click on the button you can switch to the drawing and pick a reference point that defines the value.
Rotation angle With the help of this function you can rotate the section contour.
Create Manufacturing Data You can define if manufacturing information for this SPP shall be created.